Electric spark flaw detector of direct current.
1.Characteristics:
1.1 The output voltage is adjustable from 0.5 to 30 kV.
1.2. The ability to adjust sensitivity.
1.3. Operation execution time: continuously.
1.4. Measuring device...
1.Characteristics:
1.1 The output voltage is adjustable from 0.5 to 30 kV.
1.2. The ability to adjust sensitivity.
1.3. Operation execution time: continuously.
1.4. Measuring device error: ± 2%.
1.5. AC power supply: 220 – 240 V
1.6. The presence of a light and sound signal.
1.7. Operating temperature from 0C to +40C.
1.8. The type of device is stationary.
1.9. The speed of passage of the pipe is 0.3 m/s.
2. Purpose of the device:
Checking the dielectric continuity of the internal epoxy and powder coating with a thickness of 0.35-1.5 mm. The operating mode is round–the-clock, the volume of surface control is 100% coverage.
3. Technical and operational documentation provided by the Supplier:
3.1. A set of electrical circuits.
3.2.Passports for equipment.
3.3.Certificate of Conformity.
3.4.Operation Manual.
3.5.Calibration certificate.
4.Design:
4.1.Robust housing designed for round-the-clock operation in an industrial workshop.
4.2. Operating temperature from 0C to +40C.
4.3. The presence of contacts for connecting an external alarm system.
5.Scope of delivery:
5.1.Flaw detector.
5.2.Handle holder with cable 30m.
5.3.Grounding cable 10m.
5.4.Electrodes (made of conductive rubber on an aluminum housing or high-quality steel bristles, excluding damage to the coating during inspection) to check the continuity of the inner coating of pipes with a diameter of (73,89,108,114,133,159,168,219,273,325,375,426,530 mm.). Electric spark flaw detector of direct current.Collapse
OKPD2 category:
26.51.66.129 Приборы неразрушающего контроля прочие
Not applicable. Proposal shall cover the entire lot.
Restriction on submission of a bid higher than previously submitted
Bidding initiator has set a restriction on submission of a bid with a price which is higher than the price of the previous bid submitted by the bidder. Once the bid is submitted, the stated price can not be increased.
:
Yes
Upload of bid-related documents required
Bids not supported with documentation will not be considered.
:
Yes
Auto-extension
If within the last 30 minutes of bid submission period a new bid is submitted, then bid submission deadline will automatically be extended by 30 minutes from the time the last bid is submitted.
:
30 minutes
Payment terms:
.
Delivery terms:
The delivery time is no more than 30 calendar days.
Georeferencing:
170 Votkinskoe shosse, Izhevsk, Udmurt Republic, 426039, Russia
Comments: The decision is made based on the price, payment terms and delivery dates.
Venue of bidding:
This call for bids is held in electronic form on the e-marketplace of B2B-Center group (www.b2b-center.ru). Bids shall be submitted in the form of e-document.