Production of works on the repair of the grab V= 1.6 m3 CGE See the terms of reference and related documentation. Together with the commercial offer, it is necessary to upload an estimated calculation.
OKPD2 category:
Show all (1 more)
28.22.14.121 Краны мостовые электрические
28.22.14.129 Краны грузоподъемные прочие
71.12.16.000 Услуги по инженерно-техническому проектированию производственных процессов и производств
71.12.11.900 Услуги в виде инженерно-технических консультаций прочие
Not applicable. Proposal shall cover the entire lot.
Restriction on submission of a bid higher than previously submitted
Bidding initiator has set a restriction on submission of a bid with a price which is higher than the price of the previous bid submitted by the bidder. Once the bid is submitted, the stated price can not be increased.
:
Yes
Upload of bid-related documents required
Bids not supported with documentation will not be considered.
:
Yes
Auto-extension
If within the last 30 minutes of bid submission period a new bid is submitted, then bid submission deadline will automatically be extended by 30 minutes from the time the last bid is submitted.
:
30 minutes
Payment terms:
within 30 calendar days after the signing of the acceptance certificates of the completed works
Delivery terms:
1. Application of JSC "EPM-Novocherkassk Electrode Plant"
2. Place of work:
The territory of JSC "EPM-NEZ" in the RMO department for the repair of mouthpieces.
3. Name of work:
3.1 Production of works on the repair of the grab V = 1.6 cubic meters in JSC "EPM-NEZ" in accordance with Appendix 1 - in the amount of 1 pc.
Appendix 1: List of defects for the repair of one grab V = 1.6 cubic meters
. PS: Appendix 1 indicates a complete repair of the grab. The grapple will be defective upon arrival at the repair site, and payment will be made upon completion of the work. .
4.The purpose of the work:
4.1 Maintenance of the grab 1.6 cubic meters. m
. 5. Documentation:
Drawings are attached:
5.1 damn. No. 11946SB;
5.2 damn. No. RM11946.05;
5.3 damn. No. RM11946.06;
5.4 damn. No. RM11946.07;
5.5 damn. No. RM11946.12;
5.6 damn. No. RM11946.13;
5.7 damn. No. RM11947SB;
5.8 devil. no.RM11946.01-02;
5.9 damn. No.RM11946.08;
5.10 damn. No.RM11946.04.
6. Requirement for the contractor:
• The contractor must have the necessary production and human resources to perform this work;
• Production of works under the possible influence of harmful production factors: dustiness, gas contamination, noise;
• Production of works in the cramped conditions of the existing workshop;
• Prior to registration of the work permit, the Contractor is obliged to provide the Customer with the following documents:
- a copy of the certificate (SRO) for the right to perform this type of work;
- copies of documents confirming the presence of a labor protection service and/or a labor protection specialist in the contractor (an order of appointment to a position in the contractor, a certificate of a labor protection specialist) or the existence of an agreement with an accredited organization in the field of labor protection services;
- a copy of the instruction on labor protection from the instruction log;
- POR or PPR or RTI;
- a copy of the protocol of certification of workers on labor protection;
- copies of certificates of certification of ITR on labor protection and on general requirements of industrial safety;
- medical admission of personnel.
The Contractor notifies the Customer of the fulfillment of all the specified conditions in writing with the attachment of all supporting documents. Failure to comply with the terms of this clause by the Contractor entitles the Customer to prevent the Contractor from performing the work, the delay in performing the work in this case is the fault of the Contractor.
7. Terms of work:
Agreed with the Customer (approximately 75 calendar days).
8.Payment terms:
Upon completion of the work within 30 calendar days. The works are considered to be completed in full after the Parties sign the Act of Acceptance of the completed works of the form (COP-2; COP-Z).
9.Warranty obligations:
The Contractor provides the Customer with a guarantee for the work performed for at least 12 months from the date of commissioning of the equipment.
Georeferencing:
Russia, Rostov region,
Comments: The participant who took part in the procedure (made an offer), before the deadline for accepting applications, is obliged to upload the following documents to the system:
1. Estimated calculation
2. The Charter (with all additions and changes, if any).
3. Certificate of state registration.
4. Certificate of tax registration.
5. Extract from the Unified State Register of Legal Entities.
6. Balance sheet as of the last reporting date with a mark of the tax authority on acceptance.
7. Documents confirming the representative's authority to sign documents:
— Decision (Protocol).
— Power of attorney.
8. Proposal for the execution of works (see the file "Proposal for the execution of works")
9. Contact person: Pavel Sergeevich Anufriev - Chief Mechanic
Tel.: 8 8635 29-48-24
e-mail: PAnufriev@energoprom.ru
10. Certificate of compliance with the requirements of the ISO 9001:2008 standard (if available) This request is not a notice of a tender or auction and does not give any rights to participants, does not entail any obligations other than those expressly specified in the notification.
10. Requirements for the contractor:
Prior to registration of the work permit, the Contractor is obliged to provide the Customer with the following documents:
- a copy of the certificate (SRO) for the right to perform this type of work;
- copies of documents confirming the presence of a labor protection service and/or a labor protection specialist in the contractor (an order of appointment to a position in the contractor, a certificate of a labor protection specialist) or the existence of an agreement with an accredited organization in the field of labor protection services;
- a copy of the instruction on labor protection from the instruction log;
- POR or PPR or RTI;
- a copy of the protocol of certification of workers on labor protection;
- copies of certificates of certification of ITR on labor protection and on general requirements of industrial safety. When performing work on gas, on pressure vessels, using GPM, in electrical installations, fire works – copies of certificates for each type of work;
- medical admission of personnel - copies of certificates of gas and electric welders, slingers, crane operators, lifts (towers). For gas and electric welders, copies of the PTM certification protocols.
In case of detection of inconsistencies of the information in the submitted documents with the requirements of regulatory legal acts, the Customer has the right to initiate an audit by the Health and Safety Service in matters of Occupational Safety and Industrial Safety in the Contractor's organization.
The Contractor notifies the Customer of the fulfillment of all the specified conditions in writing with the attachment of all supporting documents. Failure to comply with the terms of this clause by the Contractor entitles the Customer to prevent the Contractor from performing the work, the delay in performing the work in this case is the fault of the Contractor.
Venue of bidding:
This call for bids is held in electronic form on the e-marketplace of B2B-Center group (www.b2b-center.ru). Bids shall be submitted in the form of e-document.
Контактное лицо:
Ануфриев Павел Сергеевич - главный механик Тел.: 8 8635 29-48-24
e-mail: PAnufriev@energoprom.ru
