Repair of lids for baskets of furnaces TSPOIP See the TOR and related documentation.
A prerequisite for uploading a commercial offer is the availability of an estimated calculation (Complex service)
OKPD2 category:
Show all (1 more)
28.21.14.110 Части печных горелок
28.21.14.120 Части неэлектрических промышленных или лабораторных печей и камер
42.99.11.130 Печи доменные и коксовые печи
42.99.21.114 Строительство и ремонт доменных печей и коксовых печей
Not applicable. Proposal shall cover the entire lot.
Restriction on submission of a bid higher than previously submitted
Bidding initiator has set a restriction on submission of a bid with a price which is higher than the price of the previous bid submitted by the bidder. Once the bid is submitted, the stated price can not be increased.
:
Yes
Upload of bid-related documents required
Bids not supported with documentation will not be considered.
:
Yes
Auto-extension
If within the last 30 minutes of bid submission period a new bid is submitted, then bid submission deadline will automatically be extended by 30 minutes from the time the last bid is submitted.
:
30 minutes
Payment terms:
The contractor indicates in his commercial offer the cost, terms and payment options.
Delivery terms:
1. Application from LLC "El 6 Novocherkassk"
2. Place of work:
The Customer's territory.
3. Name of work:
Repair (for manufacturing), from the Customer's materials, parts for technological equipment in accordance with the drawings:
3.1 Lid for baskets (damn. no.TO05659SB) – 2 pcs.
4. Purpose of manufacture:
Replacement of worn lids for baskets during the next TR.
5. Requirement for the contractor:
• The contractor must have the necessary production and human resources to perform this work.
• Production of works under the possible influence of harmful production factors: dustiness, gas contamination, noise;
• Production of works in the cramped conditions of the existing workshop;
• Prior to registration of the work permit, the Contractor is obliged to provide the Customer with the following documents:
- a copy of the certificate (SRO) for the right to perform this type of work;
- copies of documents confirming the presence of a labor protection service and/or a labor protection specialist in the contractor (an order of appointment to a position in the contractor, a certificate of a labor protection specialist) or the existence of an agreement with an accredited organization in the field of labor protection services;
- a copy of the instruction on labor protection from the instruction log;
- POR or PPR or RTI;
- a copy of the protocol of certification of workers on labor protection;
- copies of certificates of certification of ITR on labor protection and on general requirements of industrial safety;
- medical admission of personnel.
The Contractor notifies the Customer of the fulfillment of all the specified conditions in writing with the attachment of all supporting documents. Failure to comply with the terms of this clause by the Contractor entitles the Customer to prevent the Contractor from performing the work, the delay in performing the work in this case is the fault of the Contractor.
6. Terms of work: agreed with the Customer.
7. Payment terms: upon completion of the work.
8. Warranty obligations: The Contractor provides the Customer with a guarantee for the work performed for at least 24 months from the date of commissioning of the equipment.
Georeferencing:
Rostov region, Novocherkassk, Aluminum platform
Comments: The participant who took part in the procedure (made an offer), before the deadline for accepting applications, is obliged to upload the following documents to the system:
1. Estimated calculation (without the estimated calculation of the TCP are not considered)
2. The Charter (with all additions and changes, if any).
3. Certificate of state registration.
4. Certificate of tax registration.
5. Extract from the Unified State Register of Legal Entities.
6. Balance sheet as of the last reporting date with a mark of the tax authority on acceptance.
7. Documents confirming the representative's authority to sign documents:
— Decision (Protocol).
— Power of attorney.
8. Work offer (see the file "Work Offer")
9. Certificate of compliance with the requirements of ISO 9001:2008 (if available)
This request is not a notice of a tender or auction and does not give any rights to participants, does not entail any obligations other than those expressly stated in the notification.
10. Prior to registration of the work permit, the Contractor is obliged to provide the Customer with the following documents:
- a copy of the certificate (SRO) for the right to perform this type of work;
- copies of documents confirming the presence of a labor protection service and/or a labor protection specialist in the contractor (an order of appointment to a position in the contractor, a certificate of a labor protection specialist) or the existence of an agreement with an accredited organization in the field of labor protection services;
- a copy of the instruction on labor protection from the instruction log;
- POR or PPR or RTI;
- a copy of the protocol of certification of workers on labor protection;
- copies of certificates of certification of ITR on labor protection and on general requirements of industrial safety. When performing work on gas, on pressure vessels, using GPM, in electrical installations, fire works – copies of certificates for each type of work;
- medical admission of personnel;
- copies of certificates of gas and electric welders, slingers, crane operators, lifts (towers). For gas and electric welders, copies of the PTM certification protocols.
If the information in the submitted documents is found to be inconsistent with the requirements of regulatory legal acts, the Customer has the right to initiate an audit by the OT and PB service in matters of Occupational Safety and Industrial Safety in the Contractor's organization.
The head of the contractor organization is obliged to submit an appeal (in two copies) containing a list of the personnel whose forces are supposed to perform the work under the contract before the start of the work under the contract. Copies of civil passports and employment contracts (or contracts of a civil nature) concluded with the persons indicated in the application must be attached to the specified application. These copies of documents must be signed by the head of the contractor organization with a certified seal.
One copy of the submitted application, together with the attached documents, is sent to the Director of Security. The second copy of the application with the documents attached to it is sent to the head of the department – the initiator of the conclusion of the contract.
In case of absence from the contracting organization of the address specified in the first paragraph of this paragraph or the attached documents, as well as in case of discrepancy of the submitted list with the contractor's application for the issuance of passes, passes for employees of the specified organization are not issued. The delay in the performance of work is attributed to the fault of the contractor. If there is a need to replace the employees indicated in the application, the head of the contracting organization submits an updated list with the relevant documents attached to it.
According to the results of the work performed under the contract, the contractor, together with the act of COP-2, provides the customer (the head of the unit – initiator of the contract) with copies of the report of the Form SSV-M "Information about insured persons" and a positive protocol of input control on the transfer of the specified report to the address of the territorial authority of the Pension Fund of Russia, signed by the EDS, for a period of time which is indicated in the act of the COP-2 form submitted by him.
In case of non-submission of the reports of the SSV-M, or a discrepancy in the smaller side of the number of employees of the contractor specified in them, with the number indicated in the appeal, the acts of the CS–2 by the customer (the head of the division - the initiator of the contract) are not signed, and the parties to the contract recognize the absence of the fact of the contractor's work, the work on the specified acts is not subject to payment.
Venue of bidding:
This call for bids is held in electronic form on the e-marketplace of B2B-Center group (www.b2b-center.ru). Bids shall be submitted in the form of e-document.
Контактное лицо:
Ануфриев Павел Сергеевич - Главный механик
Тел. 8 (8635)29-48-24,
e-mail: panufriev@energoprom.ru
