Not applicable. Proposal shall cover the entire lot.
Restriction on submission of a bid lower than previously submitted
Bidding initiator has set a restriction on submission of a bid with a price which is lower than the price of the previous bid submitted by the bidder. Once the bid is submitted, the stated price can not be reduced.
:
Yes
Upload of bid-related documentation required
Bid not supported by documentation will not be considered.
:
Yes
Auto-extension
If within the last 30 minutes of bid submission period a new bid is submitted, then bid submission deadline will automatically be extended by 30 minutes from the time the last bid is submitted.
:
30 minutes
Payment terms:
Type of payment means — cashless form of payment; 100% prepayment.
Location and terms of delivery:
Shipment terms are 1 quarter 2022.
The export of products is carried out by railway transport under an agreement with AvtoVazTrans LLC at the rates of Russian Railways with the coefficient:
K = 2.3 by the appointment of art. Togliatti - st. Sverdlovsk, Privolzhskaya, South-East, Kuibyshevskaya;
K = 2.1 by the appointment of art. Togliatti - st. Oktyabrskaya Railway, South Ural Railway, North Caucasian Railway, Moskovskaya Railway, Belorusskaya Railway, Gorkovskaya Railway, Northern Railway
The supply and cleaning of wagons on the shipment fronts is at the expense of the Buyer (approximately 7184.43 rubles. /wagon without VAT)
Deadiness is not affixed to this type of waste.
The cost is determined by net weight (gross mass minus vehicle weight).
Large scrap weighing from 4 tons, loading and transportation by road at the expense of the buyer.
Depending on the condition of the scrap, a gondola car can be loaded from 30 t.
The cost is determined by net weight (gross mass minus vehicle weight).
The component composition includes:
• Oily waste of steel and cast iron scrap (disassembled equipment, machines, structures, etc.);
• Galvanized scrap of various thicknesses;
• Waste of ferrous scrap with inseparable impurities from non-ferrous metals (heat exchangers with aluminum, copper lamellas not more than 10% of the total weight, chokes without copper coils (copper cuttings are allowed wiring not more than 1.5-2cm), steel radiators with aluminum side fittings not more than 5%, anchors, bronze and brass bushings in equipment parts, etc.);
• Carbon steel scrap with inseparable parts from alloyed and stainless steels, metal waste consisting of two or more types of scrap of different thickness, small lump waste (cinder) from welding electrodes.
• Metallurgical slag MTP.
• Rope, wire, strapping band, chains, rusted rolls of wire;
• Tinned, enameled, copper-plated, leaded, rusted and burnt steel scrap;
• Used cut containers and scrap with various non-metallic coatings (rubber, plastic, etc.);
• Used car parts with different service life, consisting of two or more types of scrap, with inseparable non-metallic inclusions or coatings, etc.;
• Pipes and pipeline elements of various thicknesses covered with tar, ebonite resin, etc.;
• Hardware weighing less than 0.025 kg (not matching 4A).
Used parts and elements of office equipment, electrical appliances that do not contain precious metals (copus, boards, chips, etc.) in small quantities.
A small amount of metal chips and scale is allowed in the LPM.
In case of formation of bulky steel, cast iron scrap of different grades of mixed weight from 4 tons, loading and transportation is carried out at the expense of the Buyer by road transport.
Depending on the condition of the scrap, a gondola car can be loaded from 30 t.
The volume is approximate. The buyer makes no claims or penalties for the volume of products that are not delivered or delivered in excess of the specification.
Conclusion of a standard agreement as amended by AVTOVAZ JSC.
The decision to select a supplier based on the results of the request for proposals is made by the Tender Committee/Subcommittee of AVTOVAZ JSC and reported in accordance with the ETP regulations.
- The tender committee/subcommittee of AVTOVAZ JSC reserves the right not to recognize any of the participants as the winner.
Venue of bidding:
This call for bids is held in electronic form on the e-marketplace of B2B-Center group (www.b2b-center.ru). Bids shall be submitted in the form of e-document.
Контактное лицо:
Широких Александр Михайлович
Alliance Purchasing Organization
LLC APO-RUS
aleksandr.shirokikh@apo-rus.com
Tel. + 7 8482 737325 Mob. + 7 967 49 30 621
2, Zastavnaya Street Togliatti, Samara Region, Russia
