Bidders can submit their proposals for certain lots of the call for bids, but necessarily for all the items within a selected lot
:
Not applicable. Proposal shall cover all the items of the selected lots
Limit bids by the price specified in the procurement notice:
Yes
Upload of bid-related documents required
Bids not supported with documentation will not be considered.
:
Yes
Auto-extension
If within the last 30 minutes of bid submission period a new bid is submitted, then bid submission deadline will automatically be extended by 30 minutes from the time the last bid is submitted.
:
30 minutes
Payment terms:
Payment for products by transferring funds to the Supplier’s bank account. Deferral for 30 calendar days, other payment terms are also considered.
Delivery terms:
Delivery is carried out to the Buyer's warehouse in Volgograd. Shipping cost is included in the product price. Delivery time is 15 days from the date of signing the Specification.
The input of three-phase voltage 3x380 V, 50 Hz to the construction site is carried out using NKU SP input and measuring NKU SP-VI-100-4-13.01, drawing TPEP.6646443.001-13.01. In this NKU, the load switch of the input unit QS1 of type VN-32 3p 100A is installed. The meter of the measuring unit (Wh) must be used of the Mercury type 230 AM-02 three-phase single tariff, 10 (100), CL 1.0. This NKU SP provides four output units. According to the drawing, the types of devices QF1 - VA47-100 2p 16A, QF2 - VA47-100 2p 16A, QF3 - VA47-100 4p 63A, QF4 - AD12 40A 30mA. The lighting network is connected to the first output unit, the "change house" is connected to the second, the welding transformer is extended to the third and the NKU SP plug-in NKU SP-Ш-32-3 extension cord, the TPEP.656443.006 drawing, which provides the connection of the power tool to the fourth various places of a building site. The fourth block of the output of the NKU SP input and measurement is made on a differential machine with a residual current device.
The power network is made of four-wire, A, B, C PEN. In the NKU joint venture for input and measurement, this network is converted into a five-wire, A, B, CN, PE
To connect the extension 5P 63A drawing TPEP.685617.005 NKU SP input and measurement it is necessary to install a stationary socket 63A 3P NE IP44 (not lower) 380V type MENNEKES.
To connect the extension 3P 32A drawing TPEP.685617.006 NKU SP input and measurement it is necessary to install a stationary socket 32A 2P E IP44 (not lower) 220V type MENNEKES.
The input of three-phase voltage of 3x380 V, 50 Hz to the construction site is carried out using NKU SP input and measuring NKU SP-VI-100-4-13.02, drawing TPEP.6646443.001-13.02. In this NKU, the load switch of the input unit QS1 of type VN-32 3p 100A is installed. The meter of the measuring unit (Wh) must be used of the Mercury type 230 AM-02 three-phase single tariff, 10 (100), CL 1.0. This NKU SP provides for three output units. According to the drawing, the types of devices QF1 - VA47-100 4p 40A, QF2 - VA47-100 4p 63A, QF3 - AD12 40A 30mA. A 3-phase power receiver up to 20 kW is connected to the first output unit, a welding transformer to the second through an extension cord, to the third through an NKU SP extension cord plug NKU SP-Sh-32-3, drawing TPEP.664443.006, which provides power tool connection in various construction site locations. The third output unit NKU SP input and measurement is made on a differential machine with a residual current device.
The power network is made of four-wire, A, B, C PEN. In the NKU joint venture for input and measurement, this network is converted into a five-wire, A, B, CN, PE
To connect the extension 5P 63A drawing TPEP.685617.005 NKU SP input and measurement it is necessary to install a stationary socket 63A 3P NE IP44 (not lower) 380V type MENNEKES.
To connect the extension 3P 32A drawing TPEP.685617.006 NKU SP input and measurement, you must install a stationary socket 32A 2P E IP44 (not lower) 220V MENNEKES.
To connect a 3-phase power receiver up to 20 kW NKU SP input and measurement it is necessary to install a stationary socket 32A 3P NE IP44 (not lower) 380V MENNEKES.
NKU SP plug-in NKU SP-Sh-32-3, drawing TPEP.6646443.006, provides the connection of power tools in various places of the construction site. Plug in 3P, 32A. Output - sockets 16A, 2P Z - 3pcs.
The input unit consists of a plug 2P Z with a rated current of 32 A and a differential machine AD12, 2P.
The output unit has three 16A sockets (2P Z), each of which is protected by a VA47-100, 2P circuit breaker.
Overall dimensions (no more): 500x400x250mm
4. Extension cord (cable KG) with plug and socket TPEP.685617.006, ЗР, 32А, length 30m - 5 pcs.
5. Extension cord (cable KG) with a plug TPEP.685617.005, 5P, 63A for connecting electrical equipment with three-phase power 3x380V; 30m - 6 pcs.
For all equipment and components should be: certificates, passports, verification documents.
In case of non-compliance with the conditions of the procurement procedure, the bidder reserves the right not to consider the submitted application.
1. Please, submit any questions concerning the bidding procedure via e-marketplace functionality ("Request for Clarifications").
2. Before submitting envelopes, participants of this procedure MUST attach the Applicant's Questionnaire and documents, according to the list, simultaneously with submitting the proposal and a file in the form of a scanned copy of their commercial proposal signed by an authorized person and certified by the seal of the organization-participant of this procedure, to their proposals in electronic form. In case a participant fails to comply with this requirement bidding organizer has the right not to consider such participant's proposal.
3. Supplier shall be either product manufacturer, or official dealer of the manufacturer or a distributor (participant shall provide the confirming documents together with the commercial proposal).
4. Products cost shall be fixed for the entire delivery period (written confirmation).
5. It is MANDATORY to provide certificates and quality certificates, technical documentation.
Note: Note, this RFP is not a notice of tender (public tender) or a public offer and is not subject to Articles 447 - 449, Part I, and Articles 1057 - 1061, Part II, of the Civil Code of the Russian Federation. Thus, this procedure does not impose the corresponding amount of civil obligations on the Customer, and the Customer reserves the right to refuse all the received proposals for any reason, or to terminate the selection procedure at any time, without incurring any liability towards the participants.
Venue of bidding:
This call for bids is held in electronic form on the e-marketplace of B2B-Center group (www.b2b-center.ru). Bids shall be submitted in the form of e-document.
The Organizer has announced the results on 24.09.2019 at 10:40
and selected the winner: "STANDART-ENERGO" OOO – (Bidder 4) (Денисов Е.А.) submitting a bid dated of 04.09.2019 14:28 totalling to 284 550,00 RUB (price incl. VAT) for all lots
Обоснование: Полное техническое и документальное соответствие запросу предложений.
