windows, doors, gates. Mandatory registration of the KP on the form of attachment with the allocation of TR. You must also consider the positional delivery of each position.
windows, doors, gates. Mandatory registration of the KP on the form of attachment with the allocation of TR. You must also consider the positional delivery of each position. delivery of the entire volume of the TMSC to 15.07.2019
Obligatory acquaintance with the file "Recommendations on packing of cargo for the regions of the extreme North"Collapse
OKPD2 category:
Show all (7 more)
16.23.11 Окна, двери балконные и их коробки, двери и их коробки и пороги деревянные
16.23.11.120 Двери балконные и их коробки деревянные
16.23.11.130 Двери, их коробки и пороги деревянные
22.19.2 Смесь резиновая и изделия из нее; резина вулканизированная, кроме твердой резины (эбонита), в виде нити, корда, пластин, листов, полос (лент), прутков и профилей
22.19.20 Смесь резиновая и изделия из нее; резина вулканизированная, кроме твердой резины (эбонита), в виде нити, корда, пластин, листов, полос (лент), прутков и профилей
22.23.14 Блоки дверные и оконные, пороги для дверей, ставни, жалюзи и аналогичные изделия и их части пластмассовые
25.12 Двери и окна из металлов
25.12.1 Двери, окна и их рамы и пороги для дверей из металлов
25.12.10 Двери, окна и их рамы и пороги для дверей из металлов
25.12.10.000 Двери, окна и их рамы и пороги для дверей из металлов
Bidders can submit a bid for separate items within the call for bids
:
Applicable
Upload of bid-related documents required
Bids not supported with documentation will not be considered.
:
Yes
Auto-extension
If within the last 30 minutes of bid submission period a new bid is submitted, then bid submission deadline will automatically be extended by 30 minutes from the time the last bid is submitted.
:
30 minutes
Payment terms:
100% post payment on the fact of receipt of the relevant party TМC to the interim warehouse TD in the city of Aldan within 10 banking days
Delivery terms:
by the supplier's forces to the intermediate warehouse of TD in the city of Aldan
Georeferencing:
Sakha Republic (Yakutia), Aldan ulus, Aldan
Comments: 1) Please note that participation in the competition means acceptance of the contract form of the buyer.
2) Be sure to attach a commercial proposal in electronic form.
3) Commercial proposal shall specify the product manufacturer, product availability, production time, time of delivery to the Supplier's warehouse, cargo dimensions (weight, volume, number of containers), dispatching point;
4) The supplied products must be new, not previously used;
5) The supplied products shall be accompanied with conformity certificates, passport, quality confirming
certificate;
6) Before shipment, be sure to fill out a packing list (see example in procurement
documentation), stick packing list on the packaging of the supplied products, copies of documents shall be sent to the customer by e-mail.
This procedure of request for proposals is not a tender, it is not subject to Articles 447-449, Section 1, Civil Code of the Russian Federation; this procedure is not a public tender, it is not subject to Articles 1057-1061, Section 2, Civil Code of the Russian Federation; Thus, this procedure does not impose the corresponding amount of civil and legal obligations on the Organizer, and the Organizer reserves the right to refuse all the proposals received for any reason, or to terminate the selection procedure at any time, incurring no liability before the participants.
Submitted commercial proposal shall specify:
1) Products cost and delivery cost (separately);
2) Conformity certificates;
3) Reference to the manufacturer;
4) Payment terms;
5) Delivery term;
6) Supplier's relation to the supplied products (manufacturer, free seller, official dealer);
7) Warranty.
8) Full compliance of the name of the TMSC in the commercial proposals (hereinafter in the shipping documents) requested in the purchase.
9) The requirement to comply with the temperature regime during the transportation of goods in the extreme north
10) Responsible-Malyshev Anatoly Andreevich. Bodies. + 7 (4112) 26-31-82, ext. 214
MalyshevAA@polymetal.ru
The packaging design (transport container) shall provide for the possibility of transport processing of goods by any mechanical device, including forklift, cranes, carts or manual manipulation, depending on the size and weight of the cargo (goods ). The design of the package shall be made in such a way as not to impede the free access to the contents of the cargo.
Rolled metal (pipes, fittings, corners, sheets, etc.) must be securely linked (wire, coil or metal tape) in bundles (packets). A bundle of cargo seats must withstand the weight of the load in the bundle during the production of loading and unloading operations and exclude the loss of metal from the ligament.
On each package should be UL (or the factory tag from the manufacturer).
Also, to prevent the shortage of TMSC at delivery, UL with full data (weight, number of pieces in 1 place)-on the list of TMSC, which is impossible to visually calculate in the cut (pipe, channel, etc.).
MANDATORY COMPLIANCE WITH PACKAGING REQUIREMENTS
Venue of bidding:
This call for bids is held in electronic form on the e-marketplace of B2B-Center group (www.b2b-center.ru). Bids shall be submitted in the form of e-document.
