1. Mesh welded galvanized for fencing, coated with polymer, size 50x50 mm, wire diameter 2.8 mm, Width of roll 2000 mm, color green tu 1275-012-00187205-2002-102 m2,
2. Pipelines from steel electric welded pipes with the casings for heating and...
1. Mesh welded galvanized for fencing, coated with polymer, size 50x50 mm, wire diameter 2.8 mm, Width of roll 2000 mm, color green tu 1275-012-00187205-2002-102 m2,
2. Pipelines from steel electric welded pipes with the casings for heating and water supply, external diameter 108 mm, wall thickness 4 mm-40.5, 2 m2,
3. Pipelines of steel electric welded pipes with casings for heating and water supply, external diameter 159 mm, wall thickness 4 mm-35.6, 2 m2,
4. Welded steel pipes with the removed chamfer of the steel grades BST2KP-BST4KP and bst2ps-bst4ps external diameter 273 mm, wall thickness 6 mm-4.37, 5 m2,
5. Flat sheet with polymer coating, type of coating polyester 25 microns, thickness 1.0 mm-66.15 m2,
6. Plastic paper-Layered 2 with decorative side-24m2,
7. Primer-Antiseptic (against fungi and mould) "Birs hydrofob Specialized"-11kg,
8. Rolled corrugated rhombic Rifija, width from 1 to 1.9 m of hot-rolled sheets with edged edges of steel with 235, thickness of 4 mm-2.1 m2,
9. Silicone sealant for external seams Masterflex 700 FR GG-
10. Exhaust vent Cylindrical from galvanized steel, type D 710.00.000-03, diameter of the pipe 1220 mm-1 pc.
11. Rolled corrugated rhombic Rifija of hot-rolled sheets with edged edges steel with 235, thickness 5 mm-172 kg piping, welded mesh, pipes, building materials, metalrolled (Buying)Collapse
OKPD2 category:
Show all (17 more)
22 Изделия резиновые и пластмассовые
13.94 Канаты, веревки, шпагат и сети
13.92.21.120 Пакеты для упаковки готовых изделий
13.94.1 Канаты, веревки, шпагат и сети, кроме отходов
13.94.9 Услуги по производству канатов, веревок, шпагата, сетей и сеток отдельные, выполняемые субподрядчиком
13.94.11 Шпагат, канаты, веревки и шнуры из джута или прочих текстильных лубяных материалов
13.94.99 Услуги по производству канатов, веревок, шпагата, сетей и сеток отдельные, выполняемые субподрядчиком
17.23 Принадлежности канцелярские бумажные
19.20.2 Топливо жидкое и газообразное; масла смазочные
19.20.4 Нефтепродукты прочие
20.5 Продукты химические прочие
20.52.10 Клеи
22.2 Изделия из пластмасс
22.29.29 Изделия пластмассовые прочие
23.32.13 Трубы, трубопроводы изоляционные, водоотводы и фитинги труб керамические
25.9 Изделия металлические готовые прочие
25.30.12.110 Оборудование вспомогательное для использования вместе с паровыми котлами
25.30.22.140 Оборудование эксплуатационное для ядерных установок
25.99 Металлоизделия готовые прочие, не включенные в другие группировки
Bidders can submit a bid for separate items within the call for bids
:
Applicable
Restriction on submission of a bid higher than previously submitted
Bidding initiator has set a restriction on submission of a bid with a price which is higher than the price of the previous bid submitted by the bidder. Once the bid is submitted, the stated price can not be increased.
:
Yes
Upload of bid-related documents required
Bids not supported with documentation will not be considered.
:
Yes
Procurement documentation:
Not uploaded
Auto-extension
If within the last 30 minutes of bid submission period a new bid is submitted, then bid submission deadline will automatically be extended by 30 minutes from the time the last bid is submitted.
:
30 minutes
Payment terms:
100% payment on the fact of delivery of goods to the buyer's warehouse within 10 bank. Days
Acceptance of goods and materials at the Buyer's warehouse
1) Commercial proposal shall be issued on the letterhead paper sealed and signed by the company’s CEO and enclosed to the uploaded documents.
2) Commercial proposal shall specify:
- price of goods and materials (including VAT, cost of delivery to the Buyer’s warehouse, cost of packing (packing must comply strictly with the requirements of GOST 15846-2002 and GOST 14192-96),
- measurement units mentioned in CP must comply with those requested;
- Supplier’s relation to the supplied goods (independent seller, dealer, manufacturer);
- time of delivery to the Buyer’s warehouse;
- warranty terms;
- estimated volume and weight (of the entire consignment);
- delivery method;
- agreement with the contract.
3) The supplied products shall be new, unused, manufactured not earlier than 6 months from the date of issuing the Technical Commercial proposal;
4) Commercial proposal shall be accompanied with conformity certificates, passport, quality certificate;
5) Before shipping be sure to provide a photo of the package, a photo of product labels (requirements for labeling are specified in the uploaded documents);
6) Contract award criteria: agreement with our contract form, delivery time, price, payment terms, operational experience;
7) This procedure does not constitute a public tender and is not regulated by Articles No. 447-449 of the Section I of the Civil Code of the Russian Federation,
8) This bidding procedure is also not a public tender and is not subject to Articles 1057-1061, Part II, of the Civil Code of the Russian Federation;
9) The cost of products transportation from Supplier's warehouse to Buyer's warehouse shall be indicated in the commercial proposal in a separate line
Venue of bidding:
This call for bids is held in electronic form on the e-marketplace of B2B-Center group (www.b2b-center.ru). Bids shall be submitted in the form of e-document.
The Organizer has announced the results on 18.02.2019 at 04:31
and selected the winner: "MAAM" OOO – (Bidder 1) (Агафонцев А.А.) submitting a bid dated of 13.02.2019 10:33 totalling to 2 211,00 RUB (price incl. VAT) on Item No. 7.