Manufacturing of a transport system for feeding the heated charge from the heaters into the intensive mixer RV-24, installed in the mixing department of the Specialized Center of Study No. 2 instead of the existing screw conveyors
Manufacturing of a transport system for feeding the heated charge from the heaters into the intensive mixer RV-24, installed in the mixing department of the Specialized Center of Study No. 2 instead of the existing screw conveyors See TOR and accompanying documentation (Complex service)Collapse
OKPD2 category:
Show all (0 more)
28.9 Оборудование специального назначения прочее
28.41.33.130 Прессы гидравлические
71.12.17 Услуги по инженерно-техническому проектированию производственных процессов и производств
Not applicable. Proposal shall cover the entire lot.
Restriction on submission of a bid higher than previously submitted
Bidding initiator has set a restriction on submission of a bid with a price which is higher than the price of the previous bid submitted by the bidder. Once the bid is submitted, the stated price can not be increased.
:
Yes
Upload of bid-related documents required
Bids not supported with documentation will not be considered.
:
Yes
Auto-extension
If within the last 30 minutes of bid submission period a new bid is submitted, then bid submission deadline will automatically be extended by 30 minutes from the time the last bid is submitted.
:
30 minutes
Payment terms:
Upon completion of the work. Payment for the installation of equipment at the end of the work, within 30 (thirty) banking days after the delivery of the results of the work, provided that the work is done properly and within the agreed period. The work is considered completed after the Parties have signed the Act of acceptance of the work performed (form KS-2) and the Certificate of the cost of work performed and costs (form KS-3)
Delivery terms:
1. Application of JSC "EPM-NEZ", Novo Cherkassk
2. Place of manufacture: Manufacturing on the territory of the Supplier, with subsequent installation and commissioning on the territory of the Customer (OJSC "EPM-NEZ" - SOC section No. 2.).
3. Products:
To manufacture transport mechanisms for supplying the heated charge from the heaters to the intensive mixers RV24 (EIRICH), with subsequent installation at the design sites, in the conditions of the existing production.
4. Purpose of manufacturing:
Replacement of existing screw conveyors due to inconsistency
requirements. Possible use of other types of transport mechanisms.
5. Process description:
Batch portions (up to 1.8 tons) are heated to a predetermined temperature in 3 batch heaters (in the diagram - PSh # 3, 4, 5). The heated charge from the heater is transported to the mixer (in the diagram - see. "EIRICH" №2). At the end of the cycle, the batch is fed from another heater in the mixer.
6. Characteristics of the transported cargo:
7. Technical requirements:
8. Equipment layout
9. Requirement for the performer:
9.1. The manufacture of transport mechanisms and the performance of work on their installation at project sites is made from the material of the contractor.
9.2. Work in a working enterprise. Business hours
round the clock.
9.3. The impact of harmful factors is possible: dustiness, gas pollution, noise.
9.4. Development of PPR and flow charts for all the necessary work.
9.5. Certification of engineers and technicians and performers.
9.6. SRO availability for these types of work.
9.7. Availability of machines and mechanisms for the entire range of works.
10. Terms of payment:
Upon completion of the work. Payment for the installation of equipment at the end of the work, within 30 (thirty) banking days after the delivery of the results of the work, provided that the work is done properly and within the agreed period. The work is considered completed after the Parties have signed the Act of acceptance of the work performed (form KS-2) and the Certificate of the cost of work performed and costs (form KS-3).
11. Production and delivery time:
The term of production is 60 working days from the date of the conclusion of the contract. The delivery time of the Products is within 10 days after the Supplier notifies the Customer about the readiness of the Products for shipment. Transport by agreement of the parties. The date and term of the installation work at the project sites is negotiated additionally.
12. Acceptance of Products:
is produced according to P-5 and P-6 after it arrives at the Customer's warehouse.
13. The Supplier provides the Customer with a guarantee for the supplied Products for at least 24 months from the date of commissioning.
Georeferencing:
Rostov region, Novocherkassk, Aluminum platform
Comments: The participant who took part in the procedure (made an offer), before the deadline for accepting applications, must upload the following documents to the system:
1. Charter (with all additions and changes, if any).
2. Certificate of state registration.
3. Tax registration certificate.
4. Extract from the Unified State Register of Legal Entities.
5. Balance sheet as of the last reporting date with the tax authority's mark of acceptance.
6. Documents confirming the authority of the representative to sign documents:
- Decision (Protocol).
- Power of attorney.
7. Work proposal (see the file "Work proposal")
8. Contact person: Martyschenko Oleg Mikhailovich - Chief Mechanic. Tel. 8 (8635) 29-48-24, fax 8 (8635) 29-42-55, e-mail: OMartischenko@energoprom.ru
9. Certificate of compliance with the requirements of ISO 9001: 2008 (if available)
This request is not a notification of a tender or auction and does not give any rights to participants, does not entail the emergence of any obligations other than those expressly indicated in the notification.
10. Before issuing a work permit for work, the Contractor is obliged to provide the Customer with the following documents:
- copy of the certificate (SRO) for the right to perform this type of work;
- copies of documents confirming the presence of a labor protection service and / or a labor protection specialist in a contractor (order for appointment to a position in a contractor, a certificate of a labor protection specialist) or the existence of an agreement with an accredited organization in the field of labor protection services;
- a copy of the instruction on labor protection from the instruction log;
- POR or PPR or RTI;
- copy of the protocol of certification of workers for labor protection;
- copies of certificates of attestation of engineers and technicians for labor protection and general industrial safety requirements. When performing work on gas, on vessels operating under pressure, using PMG, in electrical installations, during hot work - copies of certificates for each type of work;
- medical clearance of personnel;
- copies of certificates of gas-electric welders, slingers, crane drivers, hoists (towers). For gas-electric welders, copies of the certification protocols for PTM.
In case of revealing inconsistencies of the information in the submitted documents with the requirements of regulatory legal acts, the Customer has the right to initiate an audit by the Health and Safety Service in matters of Labor Protection and Industrial Safety in the Contractor's organization.
Venue of bidding:
This call for bids is held in electronic form on the e-marketplace of B2B-Center group (www.b2b-center.ru). Bids shall be submitted in the form of e-document.
Контактное лицо:
Мартыщенко Олег Михайлович - Главный механик. Тел. 8 (8635)29-48-24, факс 8 (8635)29-42-55, e-mail: OMartischenko@energoprom.ru
