Motor oil M-10V2S marine GOST 12337-84. Fuels and lubricants
The container must necessarily meet the requirements of the RKS.
ANALOGUES ARE NOT CONSIDERED !!!!
Motor oil M-10V2S marine GOST 12337-84. Fuels and lubricants
The container must necessarily meet the requirements of the RKS.
ANALOGUES ARE NOT CONSIDERED !!!! Mandatory familiarization with the file "Recommendations for packing cargo for the regions of the Far North". When forming a commercial proposal, take into account positional delivery.Collapse
OKPD2 category:
Show all (3 more)
06.1 Нефть
06.10 Нефть
19.20.2 Топливо жидкое и газообразное; масла смазочные
19.20.29 Масла нефтяные смазочные; дистилляты тяжелые, не включенные в другие группировки
19.20.29.210 Пластичные смазки
19.20.29.200 Дистилляты тяжелые, не включенные в другие группировки
Not applicable. Proposal shall cover the entire lot.
Upload of bid-related documents required
Bids not supported with documentation will not be considered.
:
Yes
Auto-extension
If within the last 30 minutes of bid submission period a new bid is submitted, then bid submission deadline will automatically be extended by 30 minutes from the time the last bid is submitted.
:
30 minutes
Payment terms:
100% post payment upon receipt of the corresponding batch of goods and materials at the intermediate warehouse of TD in Aldan within 10 banking days
Delivery terms:
By the supplier to the intermediate warehouse TD in Aldan
Georeferencing:
Republic of Sakha (Yakutia), Aldansky ulus, Aldan, Promyshlennaya str., 25
Comments: 1) Please note that participation in the competition means acceptance of the form of the buyer's contract.
2) You must attach the Commercial offer in electronic form.
3) When placing a commercial proposal, it is necessary to indicate the manufacturer of the product, availability, production time, delivery time to the supplier's warehouse, cargo dimensions (weight, volume, number of containers), point of departure;
4) The products must be new, not used;
5) Products must be accompanied by certificates of conformity, passport, document confirming
certificate;
6) Before shipment, you must fill out the packing list (see the example of filling in the purchase
documentation), stick packing list on the packaging of the supplied products, copies of documents shall be sent to the customer by e-mail.
This procedure of request for proposals is not a tender, it is not subject to Articles 447-449, Section 1, Civil Code of the Russian Federation; this procedure is not a public tender, it is not subject to Articles 1057-1061, Section 2, Civil Code of the Russian Federation; Thus, this procedure does not impose the corresponding amount of civil and legal obligations on the Organizer, and the Organizer reserves the right to refuse all the received proposals for any reason, or to terminate the selection procedure at any time, incurring no liability before the participants.
Submitted commercial proposal shall specify:
1) Separate cost for goods and separately cost for delivery;
2) Conformity certificates;
3) Manufacturer links;
4) Terms of payment;
5) Delivery time;
6) The attitude of the supplier to the supplied products (manufacturer, free seller, official dealer);
7) A guarantee.
8) Full compliance of the name of goods and materials in commercial offers (hereinafter in the shipping documents) requested in the purchase.
9) The requirement to observe the temperature regime when transporting cargo in the Far North
10) Responsible - Anatoly A. Malyshev. Tel. +7 (4112) 26-31-82, ext. 214
MalyshevAA@polymetal.ru
The design of the package (shipping container) must provide the ability to transport goods by any mechanical device, including a forklift, cranes, trolleys or manual manipulation, depending on the dimensions and weight of the cargo (goods). The design of the package should be made in such a way that it does not impede free access to the contents of the package.
Rolled metal (pipes, fittings, corners, sheets, etc.) must be securely tied (wire, wire rod or metal tape) into bundles (packages). A bundle of packages must withstand the weight of the cargo in a bundle during loading and unloading operations and exclude the loss of rolled metal from the bundle.
Each package must have a UL (or a factory label from the manufacturer).
Also, in order to prevent shortage of goods and materials during delivery, UL with complete data (weight, number of pieces in 1 place) - on the list of goods and materials that cannot be visually calculated in the cut (pipe, channel, etc.).
Venue of bidding:
This call for bids is held in electronic form on the e-marketplace of B2B-Center group (www.b2b-center.ru). Bids shall be submitted in the form of e-document.
