-to conduct routine maintenance of cranes (antirust treatment including), crane ways and grabs at CMOJeP, TSO, CGE, CPOiP, SOC
- to conduct routine maintenance of automatic lines in CMOJeP:
- to conduct routine maintenance of presses in SOC:
-...
-to conduct routine maintenance of cranes (antirust treatment including), crane ways and grabs at CMOJeP, TSO, CGE, CPOiP, SOC
- to conduct routine maintenance of automatic lines in CMOJeP:
- to conduct routine maintenance of presses in SOC:
- to conduct routine maintenance of furnaces of repeated firing CPOiP:
- to conduct routine maintenance of rotating furnace with fridge
(mechanical parts) SOC (study # 1)
- to conduct routine maintenance of crushing and grinding fine grinding equipment:
- to conduct routine maintenance of crushing and milling equipment, meals:
- to conduct routine maintenance of equipment smesilnogo
- to conduct routine maintenance of PEKO-wires:
- to conduct routine maintenance of transport systems:
- to conduct routine maintenance of equipment for screening:
to conduct routine maintenance of machines for cleaning electrodes
- to conduct routine maintenance of refrigeration: drums
- to conduct routine maintenance of bins, containers and shelving,
- to conduct routine maintenance of transport trolleys and rail tracks , see TK (Complex service)Collapse
Not applicable. Proposal shall cover the entire lot.
Restriction on submission of a bid higher than previously submitted
Bidding initiator has set a restriction on submission of a bid with a price which is higher than the price of the previous bid submitted by the bidder. Once the bid is submitted, the stated price can not be increased.
:
Yes
Upload of bid-related documents required
Bids not supported with documentation will not be considered.
:
Yes
Auto-extension
If within the last 30 minutes of bid submission period a new bid is submitted, then bid submission deadline will automatically be extended by 30 minutes from the time the last bid is submitted.
:
30 minutes
Payment terms:
in fact of fulfilled works
Delivery terms:
1. Application of OJSC "EPM-NJeZ", Novocherkassk
11. Place of work: Customer area (EPM-NJeZ ").
12. Object (technical)
Electric cranes are devices used for vertical and horizontal movement of goods. Movable metal construction with it lifting winch are essential elements of gauntry. The mechanism of lifting winch is powered by an electric motor.
Crane is a hoisting machine of cyclic action designed for lifting and moving goods held by Agency (hook, grab).
CMOJeP automatic line-consists of sequentially installed machines for machining, United transport system. Automatic lines depending on their models are designed for processing electrode blanks and nipple blanks-final cycle which produces the finished product-electrode or nipple of different sections.
Press-consist of two fixed Travers, has four columns, the main hydraulic cylinder with a plunger, two satellite cylinders with reverse plungers, intermediate traverse with the press plunger and with the pressing screw. Equipped with hydraulic and vacuum pumping stations, Fort obogrevajushhimsja, camera press cylinder and nozzles of different sections.
Designed for pressing of electrode blanks, cooling and transportation through the process train in further production.
Oven roasting re-industrial furnaces closed type, designed for roasting pressed blanks, representing a cylindrical frame inner part which is lined with refractory brick. When connecting the work of the oven are removable vaults. Roof of the furnace is a metal frame made of heat-resistant steel, lightweight with ^ brickwork, fixed to the body with the help of metal bands.
Rotary kiln with fridge-Industrial furnace direct heating, consists of parallel and installed with a slope of cylindrical shells with rotational movement around the longitudinal axis based through bandages on the rollers. The inner part of the furnace and refrigerator lined with refractory brick. The oven is designed to heat the material to physico-chemical treatment, with subsequent cooling in the refrigerator installed on water cooled condensers.
Crushing and grinding fine grinding equipment-ball-drum Mills is a device for grinding of hard materials. Drum-type mills are used in the production for grinding material to particles smaller than tenths of a millimeter. In drum-type Mills material is crushed inside a hollow rotating drum. When you rotate the grinding media (balls) and feed material (referred to as "loading") are moving on a circular path along with the drum, and then fall on the parabola. Part of the boot located closer to the axis of rotation, sliding down the spreading segments. Material is cut as a result of abrasion when relative displacement of grinding media and particulate material, as well as due to the strike. The same medium step roller mills are designed for grinding to powdered condition coke breeze.
Crushing and grinding equipment, wholemeal-hammer crusher is a chopping device working tool which is a protrusion on the rotating rotor (hammer). A breed that needs to be grind, arrives at the bunker through a grate, ignoring too large fractions capable stall work device. Degree of pulverization depends on the time spent in the bunker and the number of interactions with hammers. Therefore, rock crushers downloaded portions, and then crushed to the desired size. Crusher consists of a metal frame and hull, main rotor working body, grates and covers. Directly work rotation of Rotary device is provided through the transmission of torque from the electric motor.
Jaw Crusher drobilnomu refers to equipment for grinding of source material by squeezing between the two cheeks. Shhekovoe crushing equipment commonly used in the early stages of production for grinding raw material from medium-size to large sizes.
Smesilnoe equipment-intensive mixers RV24 AJRIH consist of a frame with weighing Terminal, futerovannogo drum rotation mechanism, zavizritelja with the tool and the rotation mechanism, as well as pitch, cooling tank tank mass and stearinovogo tank. Designed for mixing components in preparation for its pressing.
PSC-mixers are designed for mixing components in preparing the masses for its pressing and consist of heated enclosures, two swivels winder (reducer + electric motor), as well as a mechanism for unloading supply (hatch). Above the mixer installed heaters that consist of a mixture of heated hull, mechanisms for loading and unloading, as well as the rotor with the instrument and mechanism of rotation.
Pekoprovody-heated pipeline-designed for the transportation of pitch from warehouse to warehouse.
Transport systems-elevators consist of drive and tension stations, mine elevator and conveyor band equipped with buckets. A belt conveyor consists of the drive and idler rollers equipped Corps stations and transfer tape. Screw conveyor-consist of chassis, drive mechanism and Auger (screw). Vibrating conveyor consist of a body, cushioning and drive mechanisms.
All types of transport systems are used to move or feed materials production process threads.
Screening equipment-rattling vibration type GIL-consists of a casing equipped with sieves installed tiered, vibrator with electric motor, and depreciation system (suspension or pillars). Sieving equipment to separate material on the necessary fractions.
Machines for cleaning electrodes-consist of a frame (frame), which is equipped with a mechanism of rotation and lifting beams and its mechanisms of horizontal movement. This type of equipment is designed for roughing of electrode blanks of prikipevshej rockfill after annealing in kilns.
Cooling drum consists of a body with rotational movement around the longitudinal axis based through bandages on the rollers, and is intended for cooling of the material and the process train transportation.
Bin and container-serve for accumulation, storage and transmission of materials on technological threads.
Transport trolleys and paths used for transporting materials, blanks, etc. on technology line in further production.
13. The purpose of the execution of works:
Electric cranes-conducting of complex of actions to restore a healthy state, ensure its object, or restore its resource.
Automatic lines CMOJeP-conducting of complex of actions to restore and maintain the equipment in good condition.
Press-conducting of complex of actions to restore and maintain the equipment in good condition.
Kiln firing repeated work to restore elements of metalwork ovens, chassis, cooling furnace bottom furnaces.
Rotary kiln with refrigerator-works on reconstruction of furnace-bandages, support stations and rollers the oven. Conduct reconciliation tool.
Crushing and grinding equipment, fine and coarse grinding-conducting of complex of actions to restore and maintain the equipment in good condition.
Smesilnoe equipment-conducting of complex of actions to restore and maintain the equipment in good condition.
Pekoprovody-conducting of complex of actions to restore and maintain the equipment in good condition.
Transport systems, transport trolleys and paths-conducting of complex of actions to restore and maintain the equipment in good condition.
Screening equipment-conducting of complex of actions to restore and maintain the equipment in good condition.
Machines for cleaning the electrode-conducting of complex of actions to restore and maintain the equipment in good condition.
Cooling drum-work to restore elements of the refrigerating drum-bandages, support stations and commercials. Conduct reconciliation tool.
Hopper and tank-carrying out a complex of measures for the rehabilitation and maintenance of the bins and containers in good condition.
14. List and volume of work performed: in TK
15. Application: Technical documentation (drawings)-available for consultation only on the territory of JSC "EPM-NJeZ".
16. Requirement to the Executive Director:
16.1. Work on the restoration of materials-by appointment
of the parties.
16.2. Work in the conditions of an operating business. The enterprise operation mode 24/7.
16.3. Possible exposure to harmful factors: dust, fumes
16.4. Development of PPR and technological cards to all the necessary work.
16.5. Artist must have the necessary production and human qualified
resources to carry out this work. Have a certified Manager, ENGINEERS and workers
industrial safety, as well as the availability of medical admission
16.6. The presence of these types of tras works.
16.7. The availability of machines and mechanisms to accomplish the whole complex of works.
16.8. Executive staff must have and use personal protective equipment.
16.9. In the case of observations to the staff on the quality of work performed, equipment
security, as well as violations of administrative nature, at the request of the specialists
The customer must immediately replace Executive data workers.
16.10. Not qualitatively work should be altered due to the Executive Director and
To the customer.
16.11. Placement of workers employed in the execution of the work produces.
The customer, if given the opportunity, can hold a job placement contract
basis.
16.12. Development and approval of line graphs of repair of furnaces.
17. Payment terms: monthly, within 30 (thirty) days after the date of
the results of the work, provided that the work is done properly and at the agreed time. The work shall be deemed to be fulfilled after the signing by the parties of the Act of acceptance of the executed works (form COP-2) and information about the cost of work performed and costs (form COP-3).
18. Turnaround time: 15.03.2018-15.03.2019 g. Start of work agreed with the customer additionally.
19. Warranty work performed: 12 months from the date of completion of the work on each of these objects.
20. Transmission repair and inspection equipment of repair is made according to approved by JSC "EPM-NJeZ" rules.
21. Repair of the equipment is carried out in existing plants. Schedule repair shops and services shall be agreed upon with the plant (mind, EC).
22. The list of documents provided in OTPB JeGOiChS to decorate dresses-tolerances for production work by contractors:
1. Copy of certificate (SRO) to perform this type of work.
2. Copies of the briefings on occupational safety and health training log.
3. SINCE THEN, BRP or RTI.
4. Copies of certification work on occupational safety and health.
5. Copies of identity certification ITR on labour protection and the General requirements of industrial safety. When doing work on gas receptacles, working under pressure, using GMP, lifts (towers), electrical systems, conducting fire works-copies of certificates for each type of work.
6. Medical admission personnel.
7. Copies of certificates gazojelektrosvarshhikov, Slingers, operators of cranes, lifts (towers). For gazojelektrosvvarshhikov-copy protocols for fire technical minimum.
Prior to the registration of attire-the admission of all contractor employees, including managers, are required to undergo induction training in OTPB JeGOiChS (you have a document confirming identity and age). The work, all employees must have certified clothes, footwear and other personal protection equipment necessary to perform this type of work.
In the case of any document expiration outfit-admission is not provided prior to the granting of the new instrument.
14. Note:
The present terms of reference submitted to the maximum the list of carried out works in the period from 15.03.2018 g. on 15.03.2019, throughout the main production equipment of JSC "EPM-NJeZ". A specific list and amount of work for each object will be determined individually depending on the technical condition of the specific unit of the main technological equipment as operational needs. Factor (index), which is the subject of this procurement, it is used for determining the value of the contract works in current (or predicted) prices and payments for repairs between customer and contractor organizations. In this case, the main purpose of indices (coefficients) is the factor rising repair costs relative to the base level. Ratio (indices) is applied to the base of the estimated cost of the 2000 year, determined by isolated quotations or cell standards resource method, taking into account the basic value resources.
The criteria for determining the best possible options presented by bidders will be: price (conversion factor rising repair costs relative to the reference), the quality, the reliability of the counterparty, other criteria that best meet the requirements and interests of the customer.
Comments: Party, participating in the procedure (who offer) before the expiry of the deadline, is required to download to your system the following documents:
1. Bylaws (as amended and supplemented, if they were).
2. Certificate about State registration.
3. Certificate of tax registration.
4. Extract from the UNIFIED STATE REGISTER.
5. Balance sheet as of the last reporting date with tax authority stamp of acceptance.
6. Documents confirming the powers of the representative to sign the documents:
-Decision (Protocol).
-Power of attorney.
7. Proposal for execution of works (see file "work Proposal")
8. Contact person: Martyshenko Oleg-chief mechanic. Tel. 8 (8635) 29-48-24, fax 8 (8635) 29-42-55, e-mail: OMartischenko@energoprom.ru
9. Certificate of conformity to requirements of standard ISO 9001: 2008 (if available)
This request is not a notice about the contest or an auction and does not confer any rights of parties entails no duties except directly specified in the notification.
10. Executive requirements:
-Permits (CPO, licenses, tolerances).
— Development of PPR, Executive LEAD, RTI.
— Availability of certification Manager, ENGINEERS, working on industrial safety to GCO.
— The availability of medical staff work at the tolerance of GCO.
Venue of bidding:
This call for bids is held in electronic form on the e-marketplace of B2B-Center group (www.b2b-center.ru). Bids shall be submitted in the form of e-document.
