Talnah Equipment
The crate is mandatory!!!
WCM/ TMT
15 procurement fields must be filled completely
Application 2.2 to fill in MUST!!! в обязательном порядке необходимо запросить сертификат соответствия, паспорт/руководство по эксплуатации. (Supply)Collapse
OKPD2 category:
Show all (10 more)
27 Оборудование электрическое
27.1 Электродвигатели, генераторы, трансформаторы и электрическая распределительная и контрольно-измерительная аппаратура
27.11 Электродвигатели, генераторы и трансформаторы
27.11.1 Электродвигатели мощностью не более 37,5 Вт; электродвигатели постоянного тока прочие; генераторы постоянного тока
27.11.2 Электродвигатели переменного и постоянного тока универсальные мощностью более 37,5 Вт; электродвигатели переменного тока прочие; генераторы (синхронные генераторы) переменного тока
27.11.6 Части электродвигателей, генераторов и трансформаторов
27.11.10 Электродвигатели мощностью не более 37,5 Вт; электродвигатели постоянного тока прочие; генераторы постоянного тока
27.11.21 Электродвигатели переменного и постоянного тока универсальные мощностью более 37,5 Вт
Bidders can submit a bid for separate items within the call for bids
:
Applicable
Restriction on submission of a bid higher than previously submitted
Bidding initiator has set a restriction on submission of a bid with a price which is higher than the price of the previous bid submitted by the bidder. Once the bid is submitted, the stated price can not be increased.
:
Yes
Alternative bids
Alternative bid is a bid, of which the terms and conditions differ from those established in the bid-related documents.
:
Yes
Upload of bid-related documents required
Bids not supported with documentation will not be considered.
:
Yes
Auto-extension
If within the last 30 minutes of bid submission period a new bid is submitted, then bid submission deadline will automatically be extended by 30 minutes from the time the last bid is submitted.
:
30 minutes
Payment terms:
Payment of 100% (one hundred percent) of the total value of the corresponding batch of Goods within a period not later than 20 (twenty) banking days from the date of delivery of the corresponding batch of Goods (from the date of the signature consignment note without comment), and the provision of an invoice
Delivery terms:
By delivery to the buyer's warehouse, according to the specified details. The date of delivery corresponding to the batch of goods is the date of transfer by the Supplier to the Buyer of the entire batch of goods in the Taking into account the fact of further transportation of Goods to the regions of the Far North to the Object, the packaging of the cargo coming in containers should ensure the safety of the cargo during its transportation, storage ( accumulation) and cargo processing. Cargo must meet the requirements of GOST 15846-2002 and GOST 14192-96
Georeferencing:
by supplier location
Comments: KP must be issued on the official form with the seal and signature of the head and attached to the boot documentation.
In CP it is necessary to specify:
1) The cost of TMC with VAT, taking into account the delivery to the Buyer's warehouse, taking into account the packaging (Packaging should only be in accordance with the requirements of GOST 15846-2002 and GOST 14192-96). The final amount must necessarily be reflected in the CP. The cost must be final, firm, include all additional costs (packaging, marking, etc.).
The cost of the TMC in the supplier's warehouse.
The cost of delivery to the Buyer's warehouse by the Supplier
2) Relationship to products - free seller, dealer, representative, manufacturer, etc. You must download a document confirming the status of the dealer, representative.
Specify the manufacturer, country of origin.
3) Delivery time to Buyer's warehouse.
4) Method of transportation.
5) Conditions of transportation:
- special requirements in transportation, if applicable;
- storage conditions: warehouse open/closed, heated/unheated,
- temperature range at which the product retains its properties and for what period
6) Warranty on the goods. It is necessary to specify the warranty period for the goods and the date from which the warranty begins to operate (from the date of shipment from the manufacturer, shipment from the supplier's warehouse, delivery to the Buyer's warehouse, commissioning).
7) Replacement period of goods under warranty.
8) After-sales service (specify where applicable to the product. Do you provide services, training, advice on various issues related to the delivered product. Specify the company that carries out service services for the supplied goods)
9) Experience in the supply of this product on the market (attach reference list)
10) Estimated volume and weight (per volume).
11) Consent to the contract.
12) Availability of stock in warehouses.
13) The products must be new, not used, manufactured not earlier than 6 months from the date of display of the TCH;
13) Certificates of conformity, passport, proof of quality must be attached to the KP
14) Before shipment, it is necessary to provide a photo card of the product packaging, photo marking of the goods (marking requirements in the loaded documentation)
This procedure for requesting a proposal is not a contest, and its conduct is not regulated by articles 447-449 part 1 of the Civil Code of the Russian Federation;
This procedure is also not a public contest and is not regulated by articles 1057-1061 part 2 of the Civil Code of the Russian Federation;
15) In KP it is necessary to specify the validity period
Venue of bidding:
This call for bids is held in electronic form on the e-marketplace of B2B-Center group (www.b2b-center.ru). Bids shall be submitted in the form of e-document.
The Organizer has announced the results on 02.08.2021 at 07:45
and selected the winner: "COMPLEX COMMUNICATIONS" LTD – (Bidder 1) (Чепиного В.О.) submitting a bid dated of 09.06.2021 09:52 totalling to 21 515 283,64 RUB (price incl. VAT) for all items
