09.10.11.110 Услуги по наклонно-направленному бурению и повторному бурению, забуриванию, цементированию обсадных труб, откачке скважин; глушению и ликвидации скважин и прочие
28.22.18.390 Оборудование подъемно-транспортное и погрузочно-разгрузочное прочее, не включенное в другие группировки
28.22.19.190 Комплектующие (запасные части) прочего подъемно-транспортного и погрузочно-разгрузочного оборудования, не имеющие самостоятельных группировок
28.92.61.110 Комплектующие (запасные части) бурильных и проходческих машин, не имеющие самостоятельных группировок
28.99.39.190 Оборудование специального назначения прочее, не включенное в другие группировки
28.99.52.000 Части прочего оборудования специального назначения
Not applicable. Proposal shall cover the entire lot.
Restriction on submission of a bid higher than previously submitted
Bidding initiator has set a restriction on submission of a bid with a price which is higher than the price of the previous bid submitted by the bidder. Once the bid is submitted, the stated price can not be increased.
:
Yes
Upload of bid-related documents required
Bids not supported with documentation will not be considered.
:
Yes
Auto-extension
If within the last 30 minutes of bid submission period a new bid is submitted, then bid submission deadline will automatically be extended by 30 minutes from the time the last bid is submitted.
:
30 minutes
Payment terms:
the customer carries out the calculation for the work by transferring cash debits to the account of the Contractor in the following order:
100% after the end of the repair works within 90 days from the date of signing by the parties of acts of acceptance of works on repair of equipment, with the application of costing, defective statements, showing the location of defects (type, serial number drilling block, wells), Act on return materials (scrap) of repair with the signature of the responsible person logistics customer, uniform acts, OC-3, the contractor's invoices for the amount of work performed by invoices or invoices for spare parts costing more than 50 000 rubles, acts of reconciliation of accounts.
Delivery terms:
Production area contractor
Georeferencing:
423450, Russia, Republic of Tatarstan (Tatarstan), Almetyevsk, Musa Jalil str., 51
Comments: "1. The Contractor undertakes to comply with all the repair work on the equipment (according to the included defective statements). Involvement of third party allowed to subcontract when you need to perform part of the work (not more than 50%).
2. the cost of the proposed Contractor equipment repair services must be specified in the light of the acquisition of the required spare parts, wage costs, insurance, rent, taxes, customs duties, fees and other mandatory payments.
2.1. Cost to repair a piece of equipment is determined based on the actual condition of the equipment based on faulty statements and calculations for repairs. The decision on the appropriateness and cost of repairs equipment which is agreed upon with the customer in writing.
3. mandatory requirement the contractor have qualified personnel with experience to overhaul top drive systems.
4. the presence of the contractor necessary for the repair of spare parts in its own stock.
5. spare parts required for repairs or equipment, purchased and/or produced by the contractor.
6. as a result of ETP Contractor should agree with the customer calculation parameters, the calculation of the cost of the repairs with explanations of the articles the costs (labor and material costs).
7. When overhaul Contractor undertakes to restore the condition of the equipment until full or close to full resource equipment according to the technical characteristics indicated in the Passport equipment. 8. The warranty obligations of the Contractor to the customer: -Warranty works on repair of the equipment is 12 months from the date of commissioning; -With case of equipment failure (on the part of the contractor), (posleremontnyj) within the warranty period, as well as revealing the fact of unavailability of equipment during the performance of works (services), the customer shall be entitled to recover from the Contractor fined values cost of downtime (waste) drilling rig (BU types) on the basis of the cost of one hour of downtime (annex to the agreement), in the absence of downtime (not productive time) drilling crew, the customer is entitled to recover from the Contractor a fine in the amount of expenses actually incurred for the removal and installation, as well as transportation, broken equipment. -In the event of equipment failure, a Commission composed of delegates. The Commission defines the side admitted the incident directly to the rig floor, on the day of the investigation, and if there is no evidence of contracting authority, the party had caused the incident, recognized Contractor. Which, in case of disagreement with the decision of the Commission after the export of the equipment at the base of the contractor (transport provides contractor), further investigation at its own expense, shall have the right to present evidence of his innocence in the incident . While conducting further investigation, the Contractor undertakes to ensure the presence of a representative of the customer and implement its call in advance. Further investigation is performed only on the premises of the contractor. Equipment brought on production base Contractor, should be repaired within 10 working days from the date of delivery of the equipment. 9. If there is a violation of the timing equipment repair-20 calendar days, the customer has the right to apply to the contractor a penalty amounting to 0.5% of the value of work performed by the repair for each day of delay. "
Application of commercial proposals necessarily.
Get more advice on technical issues associated with the above-mentioned lot, you can:
Filippov I.n. engineer OGM LLC "MC Tatburneft" 8-987-420-16-12, 8 (88553) 38-91-28
Venue of bidding:
This call for bids is held in electronic form on the e-marketplace of B2B-Center group (www.b2b-center.ru). Bids shall be submitted in the form of e-document.
