Electrical extension piece
Power Extension Cable on Metal Coil Inforce K4-E-50
Mains voltage, V 220
Number of sockets, pcs 4
Max load (W) 3500
Degree of protection IP20
Rated current, A 16
Type of wire KG
Wire cross-section, mm2 3х2.5
Cable length, m 50
Metal coil material
Earthing is
Presence of thermal switch is
Field of application Remote work
Or analog (1 шт)
2.
Electric drill
Manufacturer BOSCH, model GBM 10 RE Professional.
Power 600 W, speed 0 - 2600 rpm, cartridge type BZP, cartridge diameter 10 mm.
Or analog (2 шт)
3.
ДЭ-380ЭР / 10 drill
or analogue
Vendor code: 50067
Model: DE-380EP / 10
Rated voltage: 220V / 50Hz
Nominal engine power input: 380W Type of engine: collector
Spindle speed at idle: 0-3000r / min
Diameter of the tool clamped in the chuck: 0,8-10mm
Drilling capacity: wood-20, steel-10
Net weight: 1,2kg
Or analog (1 шт)
4.
Screwdriver
Hitachi DV18DBL-RJ Cordless Attack Screwdriver
Tool type impact drill
Type of quick-release chuck
Number of speeds 4
Battery Powered
Diameter of the cartridge 1.5 - 13 mm
Max. number of beats per minute 27000 beats per minute
Max. idling speed 1800 rpm
The maximum torque is not less than 74 N · m
Max. Drilling capacity (wood) 65 mm
Max. Drilling capacity (metal) 13 mm
Max. Drilling capacity (concrete) 16 mm
Working modes (8 шт)
5.
Angle grinder, (USM)
Metabo WEV 15-125 Quick (600468000) Product number: 192852
Power: 1550 W
Turnover (rpm): 2800-11000
Diameter of the circle: 125 mm
Spindle thread: M14
Quick-release nut
The presence of a vibrator
Safety clutch
Protection against unintentional starting
Or analog (1 шт)
6.
Angle grinder, (USM)
Grinding machine MAKITA 9557HNZ
Type of machine
Power consumption not less than 840 W
Max. rotational speed of the disc is not less than 11000 rpm
Max. diameter of the disc 115 mm
Spindle thread M14
Power supply from the network
Possibilities for fixing the spindle
Additional two-position handle
The length of the network cable is not less than 2.5 m
Dimensions (L x H) 271 x 106 mm
Weight 1.6 kg
Configuration protective cover, side handle, support washer, clamping nut, socket wrench
Or analog (6 шт)
7.
Angle grinder, (USM)
Makita 9069 Angle grinder f230mm [9069] {2000W, 6600obm, 4.2kg, feedstuffs}
Manufacturer Makita
Main characteristics -
Model 9069
Type of equipment Grinding machine
Power, W 2000
Tool holder Spindle M14 x 2
Number of work disks 1
Speed, resolution -
Number of revolutions, rpm 6600
Dimensions -
Diameter of the disc, mm 230
Spindle thread M14
Food -
Power From the network
Voltage, V 220
Package Contents and Options -
Package Contents (6 шт)
8.
Rotary hammer
Makita HR2432 perforator
Type of fastening drill / drill SDS-Plus
Number of speeds 1
Power Consumption 780 W
Max. idling speed 1100 rpm
Max. frequency of impacts 4500 beats / min
Max. impact energy 2.2 J
Max. Drilling capacity (wood) 32 mm
Max. Drilling capacity (metal) 13 mm
Max. Drilling capacity (concrete) 24 mm
Power supply from the network
Operating modes: drilling, drilling with impact
Screwdriver is
Opportunities reverse, safety clutch, electronic control (3 шт)
9.
Rotary hammer
Makita DHR241Z 0 box
Type of fastening drill / drill SDS-Plus
Number of speeds 1
Max. idling speed 1100 rpm
Max. stroke rate 4000 beats per minute
Max. impact energy 1.9 Joules
Max. Drilling capacity (wood) 26 mm
Max. Drilling capacity (metal) 13 mm
Max. Drilling capacity (concrete) 20 mm
Battery Powered
Modes of work drilling, drilling with impact, chiselling
Screwdriver is
Possibilities of reverse, spindle lock, electronic frequency control is rotated (3 шт)
10.
Rotary hammer
HILTI TE 60-AVR
Type of fastening drill / drill SDS-Max
Number of speeds 2
Power consumption 1200 W
Max. idling speed 695 rpm
Max. impact frequency 2785 beats / min
Max. impact energy 7 J
Max. Drilling capacity (concrete) 40 mm
Power supply from the network
Modes of work drilling, drilling with impact, chiselling
Features anti-vibration system, spindle fixation
Accessories additional handle, locking the power button
Case included
Network length (6 шт)
Bids can also be submitted after the expiry of the specified period. However, bidding organizer has the right not to consider the bids submitted after bids submission deadline.
within 45 (forty five) calendar days (for SMEs - within 30 (thirty) calendar days) from the date of signing of invoices, invoices and invoices drawn up in accordance with the requirements of cl. 169 of the Tax Code of the Russian Federation (if the Supplier does not apply USNO), an advance is not provided.
Venue of bidding:
This call for bids is held in electronic form on the e-marketplace of B2B-Center group (www.b2b-center.ru). Bids shall be submitted in the form of e-document.
Documentation provision procedure:
Documentation relating to this call for bids is available in e-form free of charge at B2B-Center e-marketplace (www.b2b-center.ru) starting from the date the call for bids is published.
Please note that this Prices Monitoring Request is a procedure aimed at enabling the Organizer to determine the maximum initial contract price for a call for bids to be held afterwards, and imposes no obligations on the Organizer as to entering into a contract.
Equivalents of the requested items may be offered: