Twine p / et (bobbin 5 kg)
Chainsaw tire STIHL MS 341
Technical hair dryer ENKOR PTE-2000/3 with nozzles
Ax STAYER TAIGA 20610-13 forged with a wooden handle
Transparent adhesive tape 60mm x 130m, 45 md
Solder with flux (tube) F60007D (W)...
Twine p / et (bobbin 5 kg)
Chainsaw tire STIHL MS 341
Technical hair dryer ENKOR PTE-2000/3 with nozzles
Ax STAYER TAIGA 20610-13 forged with a wooden handle
Transparent adhesive tape 60mm x 130m, 45 md
Solder with flux (tube) F60007D (W) 23, Sn60Pb40 0.7mm
Single-sided hacksaw blade
Anti-slip PVC floor covering
Disposable control seal MK-Clip
Soldering iron electric ceramic heater 60W, CT-96
Drill set 2-14mm
File set 200mm with plastic handle
Chisel set length 160,200,300mm
Chain sharpening set for chainsaw STIHL MS 361 N
Diamond Needle File Set
P / p bag 0.55x095
Snow shovel М2.7
Side pliers 140mm
Sledgehammer, 5000 g, fiberglass rubberized handle 10932
Sledgehammer, 3000 g, fiberglass rubberized handle 10929
Sledge hammer WILTON 10 kg with handle 915 mm WI22036
Combination spanner JW 36mm
Combination wrench 30mm
Drill driver Bosch GSR 18V-LI
Cutting disc 230х3,0х22
Cutting disc 180х3х22
Powder fire extinguisher OP-8 Twine p / et
Chainsaw tire
Technical hair dryer
Hacksaw blade for metal
Disposable filling
Electric soldering iron
Set of drills, files, chisels
Set for sharpening chain, diamond file
Side nippers
Sledgehammer
Drill driver
Fire extinguisherCollapse
OKPD2 category:
Show all (14 more)
25 Изделия металлические готовые, кроме машин и оборудования
13.92.21 Мешки и пакеты, используемые для упаковки товаров
22.19 Изделия из резины прочие
22.19.73 Изделия из вулканизированной резины прочие, не включенные в другие группировки; твердая резина во всех формах и изделия из нее; напольные покрытия и коврики из вулканизированной пористой резины
22.19.73.140 Покрытия и маты (коврики) из вулканизированной пористой резины напольные
25.7 Изделия ножевые, инструмент и универсальные скобяные изделия
25.73 Инструмент
25.73.3 Инструмент ручной прочий
25.73.6 Инструмент прочий
25.73.30.150 Инструмент режущий ручной
25.73.30.141 Молотки
25.73.30.175 Ключи специальные
25.99.29.120 Лопаты
27.90 Оборудование электрическое прочее
28.24 Инструменты ручные с механизированным приводом
Bidders can submit a bid for separate items within the call for bids
:
Applicable
Equivalents of the requested items may be offered:
Yes
Restriction on submission of a bid higher than previously submitted
Bidding initiator has set a restriction on submission of a bid with a price which is higher than the price of the previous bid submitted by the bidder. Once the bid is submitted, the stated price can not be increased.
:
Yes
Upload of bid-related documents required
Bids not supported with documentation will not be considered.
:
Yes
Possibility of bid submission in a different currency
When applying, bidders can choose a currency different from the one stated for the procedure. For the purposes of bids evaluation, the prices provided in other currencies will be converted based on the official currency rate of the Russian Central Bank as of the date of publication of a call for bids.
:
Yes
Auto-extension
If within the last 30 minutes of bid submission period a new bid is submitted, then bid submission deadline will automatically be extended by 30 minutes from the time the last bid is submitted.
:
30 minutes
Payment terms:
1. 100% payment after shipment to the buyer's address within 10 banking days.
2. 100% payment upon receipt at the warehouse of MF "TD Polymetal", within 30 calendar days.
Delivery terms:
Pickup
1. The prices are to be indicated on the terms of pickup from the supplier's warehouse and taking into account air delivery to Magadan. In the cost of products, include the manufacture of the crate (is a prerequisite).
2. Indicate the date of product readiness for shipment and shipping address.
3. Indicate the manufacturer of the product. Indicate the relationship to the product. If a dealer or distributor, attach documents confirming the status.
4. Attach a Declaration of Conformity / Certificate for the proposed products. When delivered, the package must contain a passport and an operating manual.
5. Indicate the dimensions of each unit of production and the general ones according to the application (weight, volume).
6. Supplied products shall be new, not previously used. Products must comply with the terms of reference;
7. Upon shipment, a packing list must be attached to each package in the form established by the Buyer. Before shipment, you must send a photo of each package.
8. Warranty for goods and materials shall be effective at least from the date of receipt of goods and materials in Magadan port. The best option is from the date of receipt of the inventory by the customer or from the moment the inventory is put into operation (one of the proposed options is required). Indicate.
Winner selection criteria:
1. The lowest cost of the transaction, taking into account the price on the terms of self-pickup (specified in the commercial proposal) and the transport component from the Supplier's warehouse to the Buyer's warehouse (port of Magadan).
2. The term of product readiness for shipment.
3. Coordination of the proposed products by the Customer / compliance of technical parameters with the terms of reference.
4. The attitude of the participant to the product (manufacturer, dealer, free seller).
5. Providing a full package of documents specified in the conditions for the procedure.
Georeferencing:
Russia, 685000 Magadan, Magadan Commercial Sea Port
Comments: Products shall be new, unused
This procedure of request for proposals is not a tender, it is not subject to Articles 447-449, Section 1, Civil Code of the Russian Federation; this procedure is not a public tender, it is not subject to Articles 1057-1061, Section 2, Civil Code of the Russian Federation; Thus, this procedure does not impose the corresponding amount of civil and legal obligations on the Organizer, and the Organizer reserves the right to refuse all the proposals received for any reason, or to terminate the selection procedure at any time, incurring no liability before the participants.
Venue of bidding:
This call for bids is held in electronic form on the e-marketplace of B2B-Center group (www.b2b-center.ru). Bids shall be submitted in the form of e-document.
