Not applicable. Proposal shall cover the entire lot.
Restriction on submission of a bid higher than previously submitted
Bidding initiator has set a restriction on submission of a bid with a price which is higher than the price of the previous bid submitted by the bidder. Once the bid is submitted, the stated price can not be increased.
:
Yes
Upload of bid-related documents required
Bids not supported with documentation will not be considered.
:
Yes
Auto-extension
If within the last 30 minutes of bid submission period a new bid is submitted, then bid submission deadline will automatically be extended by 30 minutes from the time the last bid is submitted.
:
30 minutes
Payment terms:
The initial (maximum) lot price is rubles, including VAT and transportation costs for the delivery of materials and equipment.
- An advance payment in the amount of 50% of the product cost;
- The remaining 50% within 10 calendar days from the date of actual delivery of the batch of products to the consignee's warehouse after providing the originals (S/F, TORG12, TTN, UPD).
Delivery terms:
Shipping details:
4.1 Russia, Auto delivery, Tyumen region, Isetsky m. district, Soloboevskoe s.p., Soloboevo s.p., Gagarina str., building 58, cadastral number 72:09:1401002:883
Georeferencing:
Tyumen region, Isetsky district, Soloboevsky ss
Comments: TECHNICAL SPECIFICATIONS
Lot No. 19 "Supply of materials and equipment.
Electrochemical protection materials"
1. Supervising department: Completion Engineer,
Kolesnikov A.S., 8 913 685 59 88
2. Subject of the contract: Purchase of materials
and equipment
3. Facility: Ust-Balyk-Kurgan-Ufa-Almetyevsk
trunk oil pipeline section 700 km-759 km DN 1200
mm. The main thread. Replacement of the pipe in
the section 747-752km p. Iset. Tyumen UMN.
Reconstruction
№ p/p MTR GOST, TU U. rev. Qty
1. 2 3 4 5
1. KIP-P01-0-4 (S) -0-KP-UHL1 according to
OTT-75.180.00-KTN-042-18 Optional: stand height
3000 mm; set with agrotechnical coating that
prevents the growth of grass and shrubs rr:
(1.5х1.5) m RD-91.020.00‑KTN‑170‑ 17
OTT-75.180.00‑CTN‑042-18
pcs 5
2. KIP-P01-12-0-0-KP-UHL1 according to
OTT-75.180.00-KTN-042-18 Optional: stand height
3000 mm; kit with agrotechnical coating that
prevents the growth of grass and shrubs rr:
(1.5x1.5) m RD-91.020.00‑KTN‑170‑17
OTT-75.180.00‑KTN‑042-18
pcs 21
3. KIP-P01-0-4 (S) -BSZ (1-30A) -KP-UHL1 by
OTT-75.180.00-KTN-042-18 Optional: rack height
3000 mm; kit with agrotechnical coating that
prevents the growth of grass and shrubs rr:
(1.5x1.5) m RD-91.020.00 ‑CTN‑170‑17
OTT‑75.180.00‑KTN‑042‑18
pcs 1
4. Copper sulfate reference electrode with two
ion-exchange membranes non-polarizing Technical
characteristics: - potential for silver chloride
electrode — 0.100 ± 0.020 V; - operating
temperature from minus 10° C to +35°C; - ion
exchange membrane material - ceramic, porcelain or
porcelain-polymer; - electrolytic chamber filler
type - solid state; - with potential sensor
(auxiliary) electrode), working surface area
625±15 mm2; - service life - not less than 15
years with a warranty period of 5 years; -
complete with a shielded cable outlet with a cross
section of 2x2.5 mm² (service life is not less
reference electrode service life) - 10 m;
RD-91.020.00‑KTN‑170‑17 OTT‑75.180.00‑KTN‑042‑18
pcs 8
5. Corrosion rate indicator plate unit Technical
characteristics: - the unit consists of three
plates 2 mm wide and 0.3 mm thick, 0.4 mm and 0.5
mm, connected to a common plate 1.5 mm thick.
Control conductor is connected to each plate. The
block body is made of glass-filled polyamide; -
cross-section of the connecting wire core —
0.5-1.5 mm²; - block height — 80 mm; - block width
— 62 mm; - block thickness — 12 mm; - block weight
(without wire weight accounting) — 40 g; -
complete with MKESH cable 5x0.75 length 10 m; -
operating temperature from minus 40 to plus 100°
C; - upper value of relative humidity 100%;
RD-91.020.00‑KTN‑170‑17 OTT‑ 75.180.00‑KTN‑042-18
pcs 7
6. Crucible form
pcs 1
7. Thermite match
120 pcs
8. Copper thermite mixture - particle size is not
more than 0.5 mm. - copper scale - 64%; - aluminum
alloy with chalk - 20%; - ferromanganese - 16%.
kg 3.24
9. Magnesium protector packed Specifications: -
length of magnesium anode (without packaging)
600+7 mm; - width of magnesium anode (without
packaging) 130+4 mm; - height of magnesium anode
(without packaging) 100 +4 mm; - magnesium anode
radius (without packaging) 50+3 mm; - weight
(without packaging) 10 kg; - contact core diameter
— 5+1 mm; - magnesium anode is packed in two
cotton bags with a diameter of 200+5 mm; - free
space is filled with an activator consisting of
25% epsomite, 25% construction gypsum and 50%
concrete clay; - distance from the end of the bag
to the magnesium anode is 50+3 mm; - internal
diameter plywood washer 144+4 mm - length of the
packed tread min 700 mm - weight of packed tread
30 kg
2 pcs
10. Coke and mineral activator
M3 0.3
11. KIP-P01-0-4 (S) -0-KP-UHL1 according to
OTT-75.180.00-KTN-042-18 Optional: stand height
3000 mm; set with agrotechnical coating that
prevents the growth of grass and shrubs rr:
(1.5x1.5) m
pcs 5
12. KIP-P01-12-0-0-KP-UHL1 according to
OTT-75.180.00-KTN-042-18 Additional: stand height
3000 mm; kit with agrotechnical coating that
prevents the growth of grass and shrubs rr:
(1.5x1.5) m
pcs 23
13. KIP-P01-0-4 (S) -BSZ (1-30A) -KP-UHL1
according to OTT-75.180.00-KTN-042-18 Optional:
rack height 3000 mm; kit with agrotechnical
coating that prevents the growth of grass and
shrubs rr: (1.5x1.5) m
pcs 1
14. KIP-P01-24-0-BSZ (1-10A) -KP-UHL1 according
to OTT-75.180.00-KTN-042-18 Optional: rack height
3000 mm; kit with agrotechnical coating that
prevents the growth of grass and shrubs rr:
(1.5x1.5) m
2 pcs
15. Copper sulfate reference electrode with two
ion-exchange membranes non-polarizing Technical
characteristics: - potential for silver chloride
electrode — 0.100 ± 0.020 V; - operating
temperature from minus 10° C to +35°C; - ion
exchange membrane material - ceramic, porcelain or
porcelain-polymer; - electrolytic chamber filler
type - solid state; - with potential sensor
(auxiliary) electrode), working surface area
625±15 mm2; - service life - not less than 15
years with a warranty period of 5 years; -
complete with a shielded cable outlet with a cross
section of 2x2.5 mm² (service life is not less
than the service life of the reference electrode)
- 10 m; RD-91.020.00-KTN-170-17
OTT-29.100.99-KTN-032-19
pcs
14
16. Corrosion rate indicator plate unit Technical
characteristics: - the unit consists of three
plates 2 mm wide and 0.3 mm thick, 0.4 mm and 0.5
mm, connected to a common plate 1.5 mm thick.
Control conductor is connected to each plate. The
block body is made of glass-filled polyamide; -
cross-section of the connecting wire core —
0.5-1.5 mm²; - block height — 80 mm; - block width
— 62 mm; - block thickness — 12 mm; - block weight
(without taking into account the weight of the
wire) - 40 g; - com plex with MKESH cable 5x0.75
with a length of 10 m; - operating temperature
from minus 40 to plus 100° C; - the upper value of
the relative humidity of 100%;
RD-91.020.00-KTN-170-17 OTT- 29.100.99-KTN-032-19
pcs
9
17. Magnesium protector packed Technical
characteristics: - length of magnesium anode
(without packaging) 610+7 mm; - width of magnesium
anode (without packaging) 175+4 mm; - height of
magnesium anode (without packaging) 155+ 4 mm; -
magnesium anode radius (without packaging) 75+3
mm; - weight (without packaging) 20 kg; - contact
core diameter — 5+1 mm; - magnesium anodised in
two cotton bags with a diameter of 270+5 mm; -
free space is filled with an activator consisting
of 25% epsomite, 25% construction gypsum and 50%
concrete clay; - distance from the end of the bag
to the magnesium anode is 50+3 mm; - internal
diameter plywood washer 206+4 mm; - length of the
packed protector min 710 mm; - weight of the
packed protector is 60 kg RD-91.020.00-KTN-170-17
OTT-29.100.99-KTN-032-19
pcs
12
18. Coke and mineral activator
M3 1.8
19. Crucible form
pcs 1
20. OTT-25.160.00-KTN-068-10 Thermite Match
pcs 144
21. Copper thermite mixture - particle size is
not more than 0.5 mm. - copper scale - 64%; -
aluminum alloy with chalk - 20%; - ferromanganese
- 16%. OTT-25.160.00-KTN-068-10
kg 3.89
22. Magnesium protector packed Specifications: -
length of magnesium anode (without packaging)
600+7 mm; - width of magnesium anode (without
packaging) 130+4 mm; - height of magnesium anode
(without packaging) 100 +4 mm; - magnesium anode
radius (without packaging) 50+3 mm; - weight
(without packaging) 10 kg; - contact core diameter
— 5+1 mm; - magnesium anode is packed in two
cotton bags with a diameter of 200+5 mm; - free
space is filled with an activator consisting of
25% epsomite, 25% construction gypsum and 50%
concrete clay; - distance from the end of the bag
to the magnesium anode is 50+3 mm; - internal
diameter plywood washer 144+4 mm; - length of the
packed protector min 700 mm; - weight of the
packed protector 30 kg RD-91.020.00-KTN-170-17
pcs
4
23. Coke and mineral activator
M3 0.6
24. Place, conditions and terms (periods) for the
delivery of goods, performance of work, provision
of services.
Shipping details:
24.1. Russia, Auto delivery, Tyumen region,
Isetsky m. district, Soloboevskoe s.p., Soloboevo
s.p., Gagarina str., building 58, cadastral number
72:09:1401002:883
MTP delivery period until 10.02.2022.
25. Information on the initial (maximum) contract
price (lot price):
The initial (maximum) lot price is rubles,
including VAT and transportation costs for the
delivery of materials and equipment.
- An advance payment in the amount of 50% of the
product cost;
- The remaining 50% within 10 calendar days from
the date of actual delivery of the batch of
products to the consignee's warehouse after
providing the originals (S/F, TORG12, TTN, UPD).
6. The procedure for forming the contract price
(lot price) (with or without taking into account
the costs of transportation, insurance, payment of
customs duties, taxes and other obligatory
payments): Taking into account transportation
costs for the delivery of MTP.
7. The requirements established by the customer
for the quality, technical characteristics of
goods, work, services, their safety, functional
characteristics (consumer properties) of the
goods, dimensions, packaging, shipment of goods,
the results of work and other requirements related
to determining the compliance of the delivered
goods, the work performed, the service provided to
the needs of the customer;
The materials supplied must comply with the
specified regulatory documents.
8. Requirements for procurement participants:
Absence of unfair suppliers in the register.
Absence of tax and duty arrears for the reporting
period. Absence of liquidation, bankruptcy,
suspension of activities.
9. The list of required licenses, certificates,
permits for the right to work:
Quality passports, certificates of conformity for
the supplied materials and equipment.
10. Special conditions for the supply of goods,
works, services
The supplier must report that the products are
ready no later than 10 days before sending them to
the site. If necessary, arrange access of a
representative of Geoinform LLC to the Supplier's
warehouse for inspection
Venue of bidding:
This call for bids is held in electronic form on the e-marketplace of B2B-Center group (www.b2b-center.ru). Bids shall be submitted in the form of e-document.
