Delivery of MTR. Metal structures of the PKU, UZ, Cable overpass 729 km. PKU, UZ, Cable trestle Metal structures According to the technical specification.
OKPD2 category:
25.11.99.000 Услуги по производству металлоконструкций и их частей отдельные, выполняемые субподрядчиком
Not applicable. Proposal shall cover the entire lot.
Upload of bid-related documents required
Bids not supported with documentation will not be considered.
:
Yes
Auto-extension
If within the last 30 minutes of bid submission period a new bid is submitted, then bid submission deadline will automatically be extended by 30 minutes from the time the last bid is submitted.
:
30 minutes
Payment terms:
The initial (maximum) price of the lot is rubles, including VAT and transportation costs for the delivery of MTR.
- Advance payment in the amount of 50% of the cost of products;
- The remaining 50% within 10 calendar days from the date of the actual delivery of the batch of products to the warehouse of the consignee after providing the originals (S/F, TORG12, TTn, UPD).
Delivery terms:
Shipping details:
4.1 Auto delivery (landmark): Russia, Sverdlovsk region, Garinsky G.O., Berezovy P., coordinates 59.485636, 63.729952. (route through KhMAO-Yugra, Urai, further along the coordinates).
Georeferencing:
Sverdlovsk region, Garinsky district, the village of Berezovy. coordinates 59.485636, 63.729952. (route through Khanty-Mansi Autonomous Okrug-Yugra, Urai, further along the coordinates).
Comments: TECHNICAL SPECIFICATION
"Delivery of MTR. Metal structures of the PKU, UZ, Cable overpass 729 km."
1. Supervising department: Equipment Engineer, Kolesnikov A.S., 8 913 685 59 88
2. Subject of the contract: Purchase of MTR, LOT No. 247.
3. Object:
The section of the Surgut-Polotsk oil trunk pipeline is 712 km-767 km. Pipe replacement on the 712-729 km section. Uraiskoe UMN. Reconstruction
The table is provided in the terms of reference.
4. Place, conditions and terms (periods) of delivery of goods, performance of work, provision of services.
Shipping details:
4.1 Auto delivery (landmark): Russia, Sverdlovsk region, Garinsky G.O., Berezovy P., coordinates 59.485636, 63.729952. (route through KhMAO-Yugra, Urai, further along the coordinates).
5. Information about the initial (maximum) price of the contract (lot price):
The initial (maximum) price of the lot is rubles, including VAT and transportation costs for the delivery of MTR.
- Advance payment in the amount of 50% of the cost of products;
- The remaining 50% within 10 calendar days from the date of the actual delivery of the batch of products to the consignee's warehouse after providing the originals (S/F, TORG12, TTn, UPD).
6. The procedure for forming the contract price (lot price) (including or excluding transportation costs, insurance, payment of customs duties, taxes and other mandatory payments): Taking into account the transport costs for the delivery of the MTR.
7. The requirements established by the customer for the quality, technical characteristics of the goods, work, services, their safety, functional characteristics (consumer properties) of the goods, the size, packaging, shipment of the goods, the results of work and other requirements related to determining the conformity of the supplied goods, work performed, services rendered to the needs of the customer.
8. The supplied materials must comply with: regulatory documentation specified in Table No. 1.
9. Requirements for procurement participants:
Absence of unscrupulous suppliers in the register. Absence of arrears on taxes and fees for the reporting period. Absence of liquidation, bankruptcy, suspension of activity.
10. The list of necessary licenses, certificates, permits for the right to work:
Quality certificates, certificates of conformity for the supplied MTR.
11. Special conditions for the delivery of goods, performance of works, provision of services
11.1 The manufacturer must inform about the readiness of the products no later than 10 days before sending them to the facility. To organize access to the manufacturing base of the manufacturer of the representative of LLC "Geoinform" to check the quality of products during its manufacture and before sending to the facility. When ready for shipment, send copies of passports, certificates for products and accounting documents to e-mail kas02051981@mail.ru
11.2 Development of a set of drawings (KMD).
11.3 Anti-corrosion protection and painting:
Before applying the automatic transmission, the metal surfaces must be:
- purified Sa 2.5 GOST R ISO 8501-1-2014
- dust-free, surface dedusting class 2 (ISO 8502-3)
- degreased, degreasing degree 1 (GOST 9.402-2004)
The production of works on corrosion protection of metal structures should be carried out in accordance with the requirements of RD-23.040.00-LTN-088-14.
Have instrument equipment according to the requirements of RD-23.040.00-LTN-088-14.
Paint all metal structures with an anti-corrosion coating AKP C4 (II) UHL1 in accordance with OTT-25.220.01-KTN-097-16.
On all metal structures, it is necessary to carry out adhesive work on the LCP by the method of fungal detachment according to RD-23.040.00-LTN-088-14.
-Table No. 1 – for all positions, use a primer layer of Isolep-mastic with a coating thickness of one layer of 180 microns, WITH the EXCEPTION of lattice flooring (p.1.1.4, p.1.1.5, p.1.1.6).
-Table No. 1 pos. (1.1.1 - 1.1.3, 1.1.7- 1.1.11, 2.4 – 2.6, 2.8, 2.9, 3.5 – 3.10, 3.15 – 3.17, 4.1 – 4.3) the coating layer is POLYURETHANE UR (UV) the thickness of the coating in one layer is 60 microns RAL 7000, the total thickness should be at least 240 microns.
WITH THE EXCEPTION OF THE FENCE OGP1, OGP2, OGP3, OL1 (p.1.1.8 – 1.1.11) – painted on the primer layer with polyurethane enamel POLYTON UR/UV is not less than 240 microns., but not more than twice. RAL= 1023 (yellow).
-THE FLANGING STRIP OGP1, OGP2, OGP3, OL1 with a WIDTH of 150 MM are painted on a primer layer, polyurethane enamel POLYTON UR/UV is not less than 240 microns., but not more than twice. RAL= 7000 (grey).
- The corner and the strip (p.1-3 – 1.12) are painted with a primer layer, polyurethane enamel POLYTON UR/UV is not less than 240 microns., but not more than twice. RAL= 5005 (blue).
- Stoics of the base of the CO1 position (3.1, 3.2) the underground part is painted with an anticorrosive coating of ISOLEP MASTIC with a total thickness of 180 microns., then with bitumen rubber mastic MBR-65 (LAYER THICKNESS OF AT LEAST 3 MM). The aboveground part is painted with an anti-corrosion coating of ISOLEP-MASTIC with a total thickness of 180 microns., then with polyurethane enamel POLYTON UR/UV is not less than 240 microns, but not more than twice RAL = 7000 (gray).
- The quality of the paintwork must comply with class IV according to GOST 9.032-74.
- The thickness of the zinc coating of the lattice flooring of service areas, steps must be at least 50mkm.
- Provide a lattice flooring with a C4 anti-skid tooth.
- It is necessary to take into account all the fasteners of the service platforms, lattice flooring, etc. (hardware products, self-tapping screws with a press washer for metal, we check with the customer).
12. Materials, documentation submitted by the Customer:
Working project documentation (KM)
13. List of submitted documents based on the results of the work
The supplier submits, no later than the 5th day of the month following the reporting one:
- an invoice for the payment of the delivered MTR,
- invoice for delivered MTR,
- consignment note TORG-12 for the delivered MTR.
Venue of bidding:
This call for bids is held in electronic form on the e-marketplace of B2B-Center group (www.b2b-center.ru). Bids shall be submitted in the form of e-document.
Отдел подготовки и проведения торгов:
Для справок по предмету закупки (открытого запроса предложений) обращаться к Овчинникову Святославу Эдуардовичу, тел. 8-983-110-12-94 E-mail: Pdo_pdo@list.ru
