Steel, cast iron scrap of different brands mixed Steel, cast iron scrap of different grades mixed, does not comply with GOST 2787-75.
32AB-P/31(32)-48 Scrap and waste are not sorted. mixed, GOST 2787-19 (from 01.10.2022).
FCCO code 46101001205 (Sale)Collapse
OKPD2 category:
38.32.22.130 Лом и отходы загрязненные, смешанные (вне класса)
38.32.22.111 Лом и отходы стальные нелегированные (углеродистые)
Not applicable. Proposal shall cover the entire lot.
Restriction on submission of a bid lower than previously submitted
Bidding initiator has set a restriction on submission of a bid with a price which is lower than the price of the previous bid submitted by the bidder. Once the bid is submitted, the stated price can not be reduced.
:
Yes
Upload of bid-related documentation required
Bid not supported by documentation will not be considered.
:
Yes
Auto-extension
If within the last 30 minutes of bid submission period a new bid is submitted, then bid submission deadline will automatically be extended by 30 minutes from the time the last bid is submitted.
:
30 minutes
Payment terms:
Type of means of payment – non-cash form of payment; 100% prepayment.
Location and terms of delivery:
The delivery time is the 4th quarter of 2022.
The export of products is carried out by railway transport under an agreement with AvtovazTrans LLC at the rates of Russian Railways with a coefficient:
K = 2.3 by appointment of art. Togliatti - art . Sverdlovsk railway, Volga railway, South-Eastern railway, Kuibyshev railway;
K = 2.1 by appointment of art. Togliatti - art . Oktyabrskaya railway, South Ural railway, North Caucasian railway, Moscow railway, Belorussian railway, Gorky railway, Northern railway
Delivery and cleaning of wagons along the shipping fronts is carried out at the expense of the Buyer (approximately 7184. 43 rubles / wagon without VAT)
Bulky scrap weighing from 4 tons, loading and transportation by motor transport at the expense of the buyer.
Depending on the condition of the scrap, it is possible to load a gondola car from 30 tons.
Clogging is not indicated for this type of waste.
The cost is determined by net weight (gross weight minus vehicle weight).
The component composition of the waste:
• Oiled waste of steel and cast iron scrap (disassembled equipment, machines, structures, etc.);
• Galvanized scrap of various thicknesses;
• Waste of black scrap with inseparable impurities from non-ferrous metals (heat exchangers with aluminum, copper lamellae no more than 10% of the total weight, chokes without copper coils (copper wiring clippings no more than 1.5-2cm are allowed), steel radiators with aluminum attachments no more than 5%, anchors, bronze and brass bushings in parts of equipment etc.);
• Carbon steel scrap with inseparable parts of alloyed and stainless steels, metal waste consisting of two or more types of scrap of different thickness, small lump waste (stubs) from welding electrodes.
• Metallurgical slag MtP.
• Cables, wire, strapping tape, chains, rolled rusted coils of wire;
• Tinned, enameled, copper-plated, leaded, rusted and burnt steel scrap;
• Used cut containers and scrap with various non-metallic coatings (rubber, plastic, etc.);
• Used auto parts with different service life, consisting of two or more types of scrap, with inseparable non-metallic inclusions or coatings, etc.;
• Pipes and pipeline elements of various thicknesses, covered with tar, ebony resin, etc.;
• Hardware weighing less than 0.025 kg (not corresponding to scrap 4A).
• Used parts and elements of office equipment, electrical appliances that do not contain precious metals (housings, boards, chips, etc.) in small quantities. • The presence of metal chips and scale in a small amount is allowed in the composition of the LRM.
The volume is approximate. The buyer does not make claims and penalties for under-delivered, or delivered in excess of the specification volume of products.
Conclusion of a model contract in the editorial office of JSC AVTOVAZ.
The decision to choose a supplier based on the results of a request for proposals is made by the Tender Committee/Subcommittee of AVTOVAZ JSC and reported in accordance with the ETP regulations.
- The Tender Committee/Subcommittee of AVTOVAZ JSC reserves the right not to recognize any of the participants as the winner.
Venue of bidding:
This call for bids is held in electronic form on the e-marketplace of B2B-Center group (www.b2b-center.ru). Bids shall be submitted in the form of e-document.
Контактное лицо:
Широких Александр Михайлович
АО "АВТОВАЗ"
Дирекция по закупкам
aleksandr.shirokikh@vaz.ru
тел. + 7 8482 737325 моб. + 7 967 49 30 621