All services E-Procurement Center
• • •
Support Favorites
Чтобы использовать избранные процедуры Log in или Зарегистрируйтесь
 Favorites
Чтобы использовать избранные процедуры Log in или Зарегистрируйтесь

Request for Proposals No. 891248 
Pipes

No.NameШифрГОСТ, ТУ, серияQuantityUnit of measurePer unit price
(show both prices)		Total limit price
(show both prices)		Number of bidders
101seamless steel tubes supplied according to ТУ 1317-006.1-593377520-2003, shall be made of rolled, forged, continuous or billet centrobezhnolitoj toughness pipe samples Menager (KCU) at a temperature of tests equal to minus 60° c shall not be less than 30.0 j/cm ² toughness pipe on designs Sharpie (KCV) at the testing temperature equal to minus 46° c should be set to at least 20.0 j/cm ². Trumpet 325 x 14-13 HFA-to 52-UHL Risp. = 10.8 Mpa1825-UPN-S1-TK.SO2TU 1317-006.1-593377520-2003217мPrice not specifiedPrice not specified2
102seamless steel tubes supplied according to ТУ 1317-006.1-593377520-2003, shall be made of rolled, forged, continuous or billet centrobezhnolitoj toughness pipe samples Menager (KCU) at a temperature of tests equal to minus 60° c shall not be less than 30.0 j/cm ² toughness pipe on designs Sharpie (KCV) at the testing temperature equal to minus 46° c should be set to at least 20.0 j/cm ². Trumpet 426 x 9-13 HFA-to 52-UHL Risp. = 10.8 Mpa1825-UPN-S1-TK.SO2TU 1317-006.1-593377520-20032мPrice not specifiedPrice not specified2
103seamless steel tubes supplied according to ТУ 1317-006.1-593377520-2003, shall be made of rolled, forged, continuous or billet centrobezhnolitoj toughness pipe samples Menager (KCU) at a temperature of tests equal to minus 60° c shall not be less than 30.0 j/cm ² toughness pipe on designs Sharpie (KCV) at the testing temperature equal to minus 46° c should be set to at least 20.0 j/cm ². Trumpet 426 x 16-13 HFA-to 52-UHL Risp. = 16.0 Mpa1825-UPN-S1-TK.SO2TU 1317-006.1-593377520-2003187мPrice not specifiedPrice not specified2
104seamless steel tubes supplied according to ТУ 1317-006.1-593377520-2003 of ingot, must pass the control method of ULTRASOUND in the amount of 100% on the entire surface. Impact strength of pipes on samples Menager (KCU) at the testing temperature equal to minus 60° c shall not be less than 30.0 j/cm ² toughness pipe on designs Sharpie (KCV) at the testing temperature equal to minus 46° c should be set to at least 20.0 j/cm ². 57 tube x 5-13 HFA-to 52-UHL Risp. = 15.2 Ipa1825-UPN-S1-TK.SO2TU 1317-006.1-593377520-2003867мPrice not specifiedPrice not specified2
105seamless steel tubes supplied according to ТУ 1317-006.1-593377520-2003 of ingot, must pass the control method of ULTRASOUND in the amount of 100% on the entire surface. Impact strength of pipes on samples Menager (KCU) at the testing temperature equal to minus 60° c shall not be less than 30.0 j/cm ² toughness pipe on designs Sharpie (KCV) at the testing temperature equal to minus 46° c should be set to at least 20.0 j/cm ². Tube 89 x 5-13 HFA-to 52-UHL Risp. = 20.0 Mpa1825-UPN-S1-TK.SO2TU 1317-006.1-593377520-2003387мPrice not specifiedPrice not specified2
106seamless steel tubes supplied according to ТУ 1317-006.1-593377520-2003 of ingot, must pass the control method of ULTRASOUND in the amount of 100% on the entire surface. Impact strength of pipes on samples Menager (KCU) at the testing temperature equal to minus 60° c shall not be less than 30.0 j/cm ² toughness pipe on designs Sharpie (KCV) at the testing temperature equal to minus 46° c should be set to at least 20.0 j/cm ². Pipe x 108 5-13 HFA-to 52-UHL Risp. = 19.7 Mpa1825-UPN-S1-TK.SO2TU 1317-006.1-593377520-2003497мPrice not specifiedPrice not specified2
107seamless steel tubes supplied according to ТУ 1317-006.1-593377520-2003 of ingot, must pass the control method of ULTRASOUND in the amount of 100% on the entire surface. Impact strength of pipes on samples Menager (KCU) at the testing temperature equal to minus 60° c shall not be less than 30.0 j/cm ² toughness pipe on designs Sharpie (KCV) at the testing temperature equal to minus 46° c should be set to at least 20.0 j/cm ². Trumpet 159 x 6-13 HFA-to 52-UHL Risp. = 15.2 Ipa1825-UPN-S1-TK.SO2TU 1317-006.1-593377520-2003387мPrice not specifiedPrice not specified2
108seamless steel tubes supplied according to ТУ 1317-006.1-593377520-2003 of ingot, must pass the control method of ULTRASOUND in the amount of 100% on the entire surface. Impact strength of pipes on samples Menager (KCU) at the testing temperature equal to minus 60° c shall not be less than 30.0 j/cm ² toughness pipe on designs Sharpie (KCV) at the testing temperature equal to minus 46° c should be set to at least 20.0 j/cm ². Trumpet 219 x 6-13 HFA-to 52-UHL Risp. = 9.6 Mpa1825-UPN-S1-TK.SO2TU 1317-006.1-593377520-2003194мPrice not specifiedPrice not specified2
109seamless steel tubes supplied according to ТУ 1317-006.1-593377520-2003 of ingot, must pass the control method of ULTRASOUND in the amount of 100% on the entire surface. Impact strength of pipes on samples Menager (KCU) at the testing temperature equal to minus 60° c shall not be less than 30.0 j/cm ² toughness pipe on designs Sharpie (KCV) at the testing temperature equal to minus 46° c should be set to at least 20.0 j/cm ². Trumpet 219 x 8-13 HFA-to 52-UHL Risp. = 9.6 Mpa1825-UPN-S1-TK.SO2TU 1317-006.1-593377520-200332мPrice not specifiedPrice not specified2
110seamless steel tubes supplied according to ТУ 1317-006.1-593377520-2003 of ingot, must pass the control method of ULTRASOUND in the amount of 100% on the entire surface. Impact strength of pipes on samples Menager (KCU) at the testing temperature equal to minus 60° c shall not be less than 30.0 j/cm ² toughness pipe on designs Sharpie (KCV) at the testing temperature equal to minus 46° c should be set to at least 20.0 j/cm ². Pipe 273 x 8-13 HFA-to 52-UHL Risp. = 15.2 Ipa1825-UPN-S1-TK.SO2TU 1317-006.1-593377520-2003534мPrice not specifiedPrice not specified2
111seamless steel tubes supplied according to ТУ 1317-006.1-593377520-2003 of ingot, must pass the control method of ULTRASOUND in the amount of 100% on the entire surface. Impact strength of pipes on samples Menager (KCU) at the testing temperature equal to minus 60° c shall not be less than 30.0 j/cm ² toughness pipe on designs Sharpie (KCV) at the testing temperature equal to minus 46° c should be set to at least 20.0 j/cm ². Trumpet 325 x 8-13 HFA-to 52-UHL Risp. = 9.0 Mpa1825-UPN-S1-TK.SO2TU 1317-006.1-593377520-2003637мPrice not specifiedPrice not specified2
112seamless steel tubes supplied according to ТУ 1317-006.1-593377520-2003 of ingot, must pass the control method of ULTRASOUND in the amount of 100% on the entire surface. Impact strength of pipes on samples Menager (KCU) at the testing temperature equal to minus 60° c shall not be less than 30.0 j/cm ² toughness pipe on designs Sharpie (KCV) at the testing temperature equal to minus 46° c should be set to at least 20.0 j/cm ². Trumpet 426 x 8-13 HFA-to 52-UHL Risp. = 6.0 Mpa1825-UPN-S1-TK.SO2TU 1317-006.1-593377520-2003147мPrice not specifiedPrice not specified2
113Tubes supplied according to TU 1381-012-05757848-2005 of ingot, must pass the control method of ULTRASOUND in the amount of 100% on the entire surface. Impact strength of pipes on samples Menager (KCU) at the testing temperature equal to minus 60° c shall not be less than 30.0 j/cm ² toughness pipe on designs Sharpie (KCV) at the testing temperature equal to minus 46° c should be set to at least 20.0 j/cm ². 530 tube x 10-09 Ã2ñ-to 52-UHL Risp. = 9.45 Mpa1825-UPN-S1-TK.SO2TU 1381-012-05757848-2005267мPrice not specifiedPrice not specified1
114Tubes supplied according to TU 1381-012-05757848-2005 of ingot, must pass the control method of ULTRASOUND in the amount of 100% on the entire surface. Impact strength of pipes on samples Menager (KCU) at the testing temperature equal to minus 60° c shall not be less than 30.0 j/cm ² toughness pipe on designs Sharpie (KCV) at the testing temperature equal to minus 46° c should be set to at least 20.0 j/cm ². Tube 720 x 10-09 Ã2ñ-to 52-UHL Risp. = 6.0 Mpa1825-UPN-S1-TK.SO2TU 1303-006.2-05757848-2005,212мPrice not specifiedPrice not specified1
115Tubes supplied according to TU 1303-006.2-05757848-2005 should be made of rolled, forged, continuous or centrobezhnolitoj. Impact strength of pipes on samples Menager (KCU) at the testing temperature equal to minus 60° c shall not be less than 30.0 j/cm ² toughness pipe on designs Sharpie (KCV) at the testing temperature equal to minus 46° c should be set to at least 20.0 j/cm ². 530 tube x 10-13 HFA-to 52-UHL Risp. = 9.2 Mpa1825-UPN-S1-TK.SO2TU 1303-006.2-05757848-2005,238мPrice not specifiedPrice not specified2
116Tubes supplied according to TU 1303-006.2-05757848-2005 should be made of rolled, forged, continuous or centrobezhnolitoj. Impact strength of pipes on samples Menager (KCU) at the testing temperature equal to minus 60° c shall not be less than 30.0 j/cm ² toughness pipe on designs Sharpie (KCV) at the testing temperature equal to minus 46° c should be set to at least 20.0 j/cm ². Tube 720 x 12-13 HFA-to 52-UHL Risp. = 8.1 Mpa1825-UPN-S1-TK.SO2TU 1303-006.2-05757848-2005,5мPrice not specifiedPrice not specified1
117Pipeline steel longitudinal welded tubes from steel grade b-10 Ø 57 x 3.01825-KS-10-TOS.SO2GOST 10704-91 GOST 10705-8013,1мPrice not specifiedPrice not specified1
118Pipeline steel longitudinal welded tubes from steel grade b-10 Ø 76 x 3.01825-KS-10-TOS.SO2GOST 10704-91 GOST 10705-801мPrice not specifiedPrice not specified1
119Pipeline steel longitudinal welded tubes from steel grade b-10 Ø 108 x 4.01825-KS-10-TOS.SO2GOST 10704-91 GOST 10705-803мPrice not specifiedPrice not specified1
120Pipeline steel longitudinal welded tubes from steel grade b-10 Ø 57 x 3.01825-KS-11-TOS.SO2GOST 10704-91 GOST 10705-8013,1мPrice not specifiedPrice not specified1

<< Previous page | Next page >>
1  2  3  4  5  6  7  8  9