All services
E-Procurement Center
Request for Proposals No. 891248 Pipes
No. | Name | Шифр | ГОСТ, ТУ, серия | Quantity | Unit of measure | Per unit price (show both prices) | Total limit price (show both prices) | Number of bidders |
21 | {25} | 1825-UPN-11-TKh.SO2 izm1 | TU 14-3R-1128-2007 | 69 | м | Price not specified | Price not specified | 1 |
22 | {26} | 1825-UPN-11-TKh.SO2 izm1 | TU 14-3R-1128-2007 | 60 | м | Price not specified | Price not specified | 1 |
23 | Tubes supplied according to TU 14-3 r-1128-2007 of ingot, must pass the control method of ULTRASOUND in the amount of 100% on the entire surface. Impact strength of pipes on samples Menager (KCU) at the testing temperature equal to minus 60° c shall not be less than 30.0 j/cm ² toughness pipe on designs Sharpie (KCV) at the testing temperature equal to minus 60° c should be set to at least 20.0 j/cm ². 325 x 8 pipe-to-48-09Г2С UHL Risp. = 9.0 Mpa | 1825-UPN-11-TKh.SO2 izm1 | TU 14-3R-1128-2007 | 5 | м | Price not specified | Price not specified | 1 |
24 | Tubes supplied according to TU 1381-012-05757848-2005 of ingot, must pass the control method of ULTRASOUND in the amount of 100% on the entire surface. Impact strength of pipes on samples Menager (KCU) at the testing temperature equal to minus 60° c shall not be less than 30.0 j/cm ² toughness pipe on designs Sharpie (KCV) at the testing temperature equal to minus 46° c should be set to at least 20.0 j/cm ². 630 x 10-09 pipe Ã2ñ-K50-UHL Risp. = 6.5 Mpa | 1825-UPN-11-TKh.SO2 izm1 | TU 1381-012-05757848-2005 | 34 | м | Price not specified | Price not specified | 1 |
25 | Tubes supplied according to TU 14-3 r-1128-2007, shall be constructed of ingot, subject to their control by the method of ULTRASOUND in the amount of 100% on the entire surface. Impact strength of pipes on samples Menager (KCU) at the testing temperature equal to minus 60° c shall be at least 30 j/cm ²; Toughness pipe on designs Sharpie (KCV) at the testing temperature equal to minus 40° c should be set to at least 20 Joules/cm2. 57 x 4-09 Ã2ñ-to 48-UHL; RISP. = 20.0 Mpa | 1825-UPN-12-TKh.SO2 | TU 14-3R-1128-2007 | 98 | м | Price not specified | Price not specified | 1 |
26 | seamless steel pipes, strength class to 52, delivered according to TU 006.1-1317-593377520-2003 shall be manufactured from rolled, forged, continuous or billet centrobezhnolitoj toughness pipe samples Menager (KCU) when testing temperature equal to minus 60° c shall be at least 30 j/cm ²; Toughness pipe on designs Sharpie (KCV) at the testing temperature equal to minus 40° c should be set to at least 20 Joules/cm2. 89 x 6-13 HFA-to 52-UHL; Pwork. = 7.5 Mpa; RISP. = 20 Mpa | 1825-UPN-12-TKh.SO2 | TU 1317-006.1-593377520-2003 | 68 | м | Price not specified | Price not specified | 2 |
27 | seamless steel pipes, strength class to 52, delivered according to TU 006.1-1317-593377520-2003 shall be manufactured from rolled, forged, continuous or billet centrobezhnolitoj toughness pipe samples Menager (KCU) when testing temperature equal to minus 60° c shall be at least 30 j/cm ²; Toughness pipe on designs Sharpie (KCV) at the testing temperature equal to minus 40° c should be set to at least 20 Joules/cm2. 108 x 5-13 HFA-to 52-UHL; Pwork. = 7.5 Mpa; RISP. = 16.4 Mpa | 1825-UPN-12-TKh.SO2 | TU 1317-006.1-593377520-2003 | 21 | м | Price not specified | Price not specified | 2 |
28 | seamless steel pipes, strength class to 52, delivered according to TU 006.1-1317-593377520-2003 shall be manufactured from billet, subject to their control by the method of ULTRASOUND in the amount of 100% on the entire surface. Impact strength of pipes on samples Menager (KCU) at the testing temperature equal to minus 60° c shall be at least 30 j/cm ²; Toughness pipe on designs Sharpie (KCV) at the testing temperature equal to minus 40° c should be set to at least 20 Joules/cm2. 57 * 6-13HFA-to 52-UHL; Pwork. = 7 MPA; RISP. = 20 Mpa | 1825-UPN-12-TKh.SO2 | TU 1317-006.1-593377520-2003 | 42 | м | Price not specified | Price not specified | 2 |
29 | seamless steel pipes, strength class to 52, delivered according to TU 006.1-1317-593377520-2003 shall be manufactured from billet, subject to their control by the method of ULTRASOUND in the amount of 100% on the entire surface. Impact strength of pipes on samples Menager (KCU) at the testing temperature equal to minus 60° c shall be at least 30 j/cm ²; Toughness pipe on designs Sharpie (KCV) at the testing temperature equal to minus 40° c should be set to at least 20 Joules/cm2. 219 x 6-13 HFA-to 52-UHL; Pwork. = 7 MPA; RISP. = 20 Mpa | 1825-UPN-12-TKh.SO2 | TU 1317-006.1-593377520-2003 | 16 | м | Price not specified | Price not specified | 2 |
30 | seamless steel pipes, strength class to 52, delivered according to TU 006.1-1317-593377520-2003 shall be manufactured from billet, subject to their control by the method of ULTRASOUND in the amount of 100% on the entire surface. Impact strength of pipes on samples Menager (KCU) at the testing temperature equal to minus 60° c shall be at least 30 j/cm ²; Toughness pipe on designs Sharpie (KCV) at the testing temperature equal to minus 40° c should be set to at least 20 Joules/cm2. 219 x 6-13 HFA-to 52-UHL; Pwork. = 0, 155MPa; RISP. = 14.2 Mpa | 1825-UPN-12-TKh.SO2 | TU 1317-006.1-593377520-2003 | 39 | м | Price not specified | Price not specified | 2 |
31 | seamless steel pipes, strength class to 52, delivered according to TU 006.1-1317-593377520-2003 must conform to technical requirements for them. Mechanical properties of metal pipes when tests should be specified in the specification. Impact strength material piping on samples Menager (KCU) at the testing temperature equal to minus 60° c shall be at least 30.0 j/cm2. Material toughness pipeline designs Sharpie (KCV) at the testing temperature equal to minus 40° c shall be at least 20.0 j/cm2. 108 tube x 6-13-HFA to 52-UHL Risp. = 30.41 Mpa | 1825-UPN-13a-TKh.SO2 | TU 1317-006.1-593377520-2003 | 26 | м | Price not specified | Price not specified | 2 |
32 | Tubes supplied according to TU r-14-3 1128-2007 shall be made of the ingot through SPL method in volume control 100% of the entire surface toughness Value material pipeline components on samples Menager (KCU) at a temperature of tests equal to minus 60° c shall be at least 30 j/cm2. The value of the toughness of the material parts of pipelines on samples Sharpie (KCV) at the testing temperature equal to minus 40° c. 57 tube x 4-09 Ã2ñ-to 48-UHL, Rzav. = 20.0 Mpa | 1825-UPN-14-TKh.SO2 | TU 14-3R-1128-2007 | 92 | м | Price not specified | Price not specified | 1 |
33 | Tubes supplied according to TU r-14-3 1128-2007 shall be made of the ingot through SPL method in volume control 100% of the entire surface toughness Value material pipeline components on samples Menager (KCU) at a temperature of tests equal to minus 60° c shall be at least 30 j/cm2. The value of the toughness of the material parts of pipelines on samples Sharpie (KCV) at the testing temperature equal to minus 40° c. Tube 89 x 4-09 Ã2ñ-to 48-UHL, Rzav. = 16.60 Mpa | 1825-UPN-14-TKh.SO2 | TU 14-3R-1128-2007 | 50 | м | Price not specified | Price not specified | 1 |
34 | Tubes supplied according to TU r-14-3 1128-2007 shall be made of the ingot through SPL method in volume control 100% of the entire surface toughness Value material pipeline components on samples Menager (KCU) at a temperature of tests equal to minus 60° c shall be at least 30 j/cm2. The value of the toughness of the material parts of pipelines on samples Sharpie (KCV) at the testing temperature equal to minus 40° c. Tube x 108 4-09 Ã2ñ-to 48-UHL, Rzav. = 13.60 Mpa | 1825-UPN-14-TKh.SO2 | TU 14-3R-1128-2007 | 39 | м | Price not specified | Price not specified | 1 |
35 | Tubes supplied according to TU r-14-3 1128-2007 shall be made of the ingot through SPL method in volume control 100% of the entire surface toughness Value material pipeline components on samples Menager (KCU) at a temperature of tests equal to minus 60° c shall be at least 30 j/cm2. The value of the toughness of the material parts of pipelines on samples Sharpie (KCV) at the testing temperature equal to minus 40° c. 219 x 6-09 pipe Ã2ñ-to 48-UHL, Rzav. = 10.1 Mpa | 1825-UPN-14-TKh.SO2 | TU 14-3R-1128-2007 | 56 | м | Price not specified | Price not specified | 1 |
36 | seamless steel tubes supplied according to TU 14-3 r-124-2012, made of rolled wrought iron, continuous or billet centrobezhnolitoj, must be tested for impact toughness. Impact strength of pipes on samples Menager (KCU) at the testing temperature equal to minus 60° c shall not be less than 30.0 j/cm ² toughness pipe on designs Sharpie (KCV) at the testing temperature equal to minus 46° c should be set to at least 20.0 j/cm ². 108 tube x 6-13-HFA to 52-UHL Risp. = 21.00 Mpa | 1825-UPN-15-TKh.SO2 izm1 | TU 14-3R-124-2012 | 14 | м | Price not specified | Price not specified | 2 |
37 | seamless steel tubes supplied according to TU 14-3 r-124-2012, made of rolled wrought iron, continuous or billet centrobezhnolitoj, must be tested for impact toughness. Impact strength of pipes on samples Menager (KCU) at the testing temperature equal to minus 60° c shall not be less than 30.0 j/cm ² toughness pipe on designs Sharpie (KCV) at the testing temperature equal to minus 46° c should be set to at least 20.0 j/cm ². Trumpet 159 x 8-13 HFA-to 52-UHL Risp. = 19.70 Mpa | 1825-UPN-15-TKh.SO2 izm1 | TU 14-3R-124-2012 | 41 | м | Price not specified | Price not specified | 2 |
38 | seamless steel tubes supplied according to TU 14-3 r-124-2012, made of rolled wrought iron, continuous or billet centrobezhnolitoj, must be tested for impact toughness. Impact strength of pipes on samples Menager (KCU) at the testing temperature equal to minus 60° c shall not be less than 30.0 j/cm ² toughness pipe on designs Sharpie (KCV) at the testing temperature equal to minus 46° c should be set to at least 20.0 j/cm ². Pipe x 325 14-13-HFA to 52-UHL Risp. = 23.30 Mpa | 1825-UPN-15-TKh.SO2 izm1 | TU 14-3R-124-2012 | 15 | м | Price not specified | Price not specified | 2 |
39 | seamless steel tubes supplied according to ТУ 1317-006.1-593377520-2003 of ingot, must pass the control method of ULTRASOUND in the amount of 100% on the entire surface. Impact strength of pipes on samples Menager (KCU) at the testing temperature equal to minus 60° c shall not be less than 30.0 j/cm ² toughness pipe on designs Sharpie (KCV) at the testing temperature equal to minus 46° c should be set to at least 20.0 j/cm ². 108 x 5 pipe-13HFA-to 52-UHL Risp. = 13.60 Mpa | 1825-UPN-15-TKh.SO2 izm1 | TU 1317-006.1-593377520-2003 | 71 | м | Price not specified | Price not specified | 2 |
40 | seamless steel tubes supplied according to ТУ 1317-006.1-593377520-2003 of ingot, must pass the control method of ULTRASOUND in the amount of 100% on the entire surface. Impact strength of pipes on samples Menager (KCU) at the testing temperature equal to minus 60° c shall not be less than 30.0 j/cm ² toughness pipe on designs Sharpie (KCV) at the testing temperature equal to minus 46° c should be set to at least 20.0 j/cm ². Trumpet 159 x 8-13 HFA-to 52-UHL Risp. = 19.70 Mpa | 1825-UPN-15-TKh.SO2 izm1 | TU 1317-006.1-593377520-2003 | 36 | м | Price not specified | Price not specified | 2 |