Request for Quotations No. 1143574 
Fans

This call for bids is archived
Participation in bidding is no longer possible. You may wish to check similar calls for bids currently available

Fans
fans (Buying)

OKPD2 category:
28.25.12.190  Оборудование для кондиционирования воздуха прочее, не включенное в другие группировки
29.32.30.269  Узлы и детали систем вентиляции, отопления и кондиционирования воздуха, не включенные в другие группировки
Item of classifier of goods, works and services:Вентилятор центробежный ВЦ 14-46-6,3-3-1-K(PPs)-Л0-АИР180М6-Ч-П- УХЛ3 с доп. опциями, где ВЦ - вентилятор центробежный радиальный среднего давления полевой общепромышленный; 14 - округленная до целого числа стократная величина коэффициента полного давления; 46 - величина быстроходности округленная до целого числа; 6,3 - номер вентилятора по ГОСТ 10616-2015; 3 - конструктивное исполнение №3 по ГОСТ 5976-90 чертеж 5 (рабочее колесо на валу подшипникового узла, связанном с электродвигателем втулочно-пальцевой муфтой); 1 - первый класса окружной скорости колеса; K(PPs) - корпус и рабочее колесо изготовлены из материалов коррозионно-кислотостойкого трудновоспламеняемого полипропилена PPs от 0 до +100 град. Цельсия, согласно ТУ 2291-001-95801889-2015; Л0 - установлен в нулевом положении (0 град.) корпуса вентилятора левого вращения со стороны всасывания; АИР180М6-Ч-П - асинхронный электродвигатель типоразмера АИР180М6 мощностью 18,5 кВт с частотой вращения 975 об/мин комплектно с выносным преобразователем частоты при номинальном напряжение сети 400/690 В; климатическое исполнение УХЛ3 по ГОСТ 15150-69; дополнительные опции: наличия смотрового лючка (инспекционная дверь), комплект сварных гофрированных 6-ти волновых химстойких полипропиленовых гибких вставок на всасывание и нагнетание по размерам соответственно, комплект виброизоляторов пружинного типа ДО, дренажный патрубок, полимерная крышка на болты ступицы
Quantity:2 Штука
Total price:Price not specified
Currency:RUB
Contract award criteria:price excl. of VAT (show both prices)
Publication date:
Bid submission deadline:19.12.2018 09:10 (was extended by 10 min, 40 sec)
Last edited:05.12.2018 10:07
Bidding cancellation date:17.01.2019 04:48
Organizer (Initiator):POLYMETAL TRADING, LTD
Additional info
Per-item bid submission:Not applicable. Proposal shall cover the entire lot.
Upload of bid-related documents required
Bids not supported with documentation will not be considered.
:
Yes
Procurement documentation:Not uploaded
Auto-extension
If within the last 30 minutes of bid submission period a new bid is submitted, then bid submission deadline will automatically be extended by 30 minutes from the time the last bid is submitted.
:
30 minutes
Payment terms:30% advance payment within 10 business from contract conclusion with the selected Supplier, 70% within 10 business days from delivery of the products to the specified warehouse, cost of delivery to the specified warehouse must be included in the cost of products, delivery cost shall be indicated in a separate field.
Delivery terms:selection criteria for the best offer: quality, delivery time, price, payment terms, operational experience;
2) This procedure does not constitute a public tender and is not subject to Articles No. 447-449 of the Part I of the Civil Code of the Russian Federation;
3) This procedure is also not a public auction and is not subject to Articles 1057-1061, Part II, of the Civil Code of the Russian Federation.
Thus, this RFP procedure does not impose the corresponding amount of civil and legal obligations on the Customer
Georeferencing:682644, Russia, Khabarovsk Territory, Amursk, Mashinostroiteley, 5
Comments:
in the commercial offer specify:
1. Supplier's contact info (including contact person)
2. Supplier’s relation to the supplied products (manufacturer, manufacturer’s representative, free seller, dealer).
3. Products’ Manufacturer
4. Price per unit (excluding and including 18 % VAT):
3.1. for goods produced in Russia:
3.1.1. price at the Supplier’s warehouse (shipment point shall be indicated) in case of Ex-Works basis.
3.1.2. Price of the products delivered by the Supplier to the Supplier’s warehouse in Amursk (delivery by trucks)/railway station in Komsomolsk-na-Amure (when sending a 20/ 40 ft containers by rail) / Mylky railway station (when the cargo sent is delivered in railway carriages).
3.2. For products manufactured and imported from abroad:
3.2.1. price of the goods at customs clearance point subject to DDP delivery terms (port.... / railway station ... , customs clearance point is to be indicated) in case of Ex-Works.
The price of the goods shall include all costs at customs clearance point: delivery to CCP, costs of customs clearance, costs of storage during customs clearance, costs of closing the warehouse, costs of loading the goods on the appropriate transport.
Price per item can be specified in rubles or foreign currency at the exchange rate on the day of payment.
4.2.2. price of the products delivered by the Supplier to the Supplier’s warehouse in Amursk (delivery by trucks) / railway station in Komsomolsk-na-Amure (when sending a 20/ 40 ft containers by rail) / Mylky railway station (when the cargo sent is delivered in railway carriages) – in case the price of products is indicated at CCP in rubles.
5. Packaging/container type
6. Transportation method – delivery by trucks, by railways, by sea
7. Type of rolling stock (RS) - 20 ft container 40 ft container, gondola car, boxcar, baggage car, autorack;
8. RS load rate and the total number of RS.
9. Transportation costs - for options 3.1.2. and 3.2.2. specify delivery cost per unit of product / 1 PS / whole consignment.
For option 3.2.2. transport costs are to be indicated in rubles
10. Delivery time, days - after ....... (Specify) to the Customer’s warehouse / customs clearance point / products availability (in case of Ex Works).
11. Payment terms
12. Availability in stock
13. Manufacturer's Warranty (indicating measurement units)
14. Possibility of products supply by quarterly consignments
15. Commercial proposal validity period
16. Provide copies of the following documents:
- quality certificate,
- conformity certificate,
- Safety Passport substance.
17. Delivery in 1st quarter of 2019 year.
Venue of bidding:This call for bids is held in electronic form on the e-marketplace of B2B-Center group (www.b2b-center.ru). Bids shall be submitted in the form of e-document.

This call for bids is archived
Participation in bidding is no longer possible. You may wish to check similar calls for bids currently available
  Submit a question
Latest submitted bids
Status of bidding: archived.

Organizer has decided to cancel the call for bids.
Call for bids cancellation date: 17.01.2019 at 04:48.
call for bids cancellation reason:

Замена комплектации

Total bids: 2. More >>