Execution of works on the manufacture and installation of the modular building of the entrance office of LLC "PhosAgro-Lipetsk" Modular entrance building measuring 3.0x6.0m, h-2.7m (clean after finishing the premises)Collapse
OKPD2 category:
41.20.20.290 Здания нежилые, не включенные в другие группировки
Not applicable. Proposal shall cover the entire lot.
Restriction on submission of a bid higher than previously submitted
Bidding initiator has set a restriction on submission of a bid with a price which is higher than the price of the previous bid submitted by the bidder. Once the bid is submitted, the stated price can not be increased.
:
Yes
Alternative bids
Alternative bid is a bid, of which the terms and conditions differ from those established in the bid-related documents.
:
Yes
Upload of bid-related documents required
Bids not supported with documentation will not be considered.
:
Yes
Auto-extension
If within the last 30 minutes of bid submission period a new bid is submitted, then bid submission deadline will automatically be extended by 30 minutes from the time the last bid is submitted.
:
30 minutes
Payment terms:
The cost of all materials, transportation costs (delivery, loading/unloading) and all other expenses related to the performance of work, all taxes, fees and other mandatory payments are included in the contract price.
Delivery terms:
Production and delivery to the address: Lipetsk, Papina str., 2
Georeferencing:
398024, Russia, Lipetsk region, Lipetsk, P. A. Papina str., 2
Comments: The outer size of the passage 3.0x6.0 m
Frame:
80x80x3mm, 50x50x3mm, 40x20x2mm , reinforced at the corners (kerchiefs) + transport eyelets, crate timber 50x100mm.
The roof is single-pitched. To organize the collection of water from the roof through the gutter into one plastic downpipe, graphite gray color, 100 mm in diameter. To fix the pipe to the building on anchor suspensions. Place the pipe tip at a height of 200 mm from the base level.The direction of the roof slope and the installation location of the downpipe in accordance with Appendix No. 2.
The height of the checkpoint is 2.7 meters from floor to ceiling (clean after finishing the premises).
Exterior decoration:
Facade cassettes made of aluminum composite material, thickness 4 mm. Color solutions and appearance must strictly correspond to the visualization (Appendix No. 1).
The roof:
- rafter system (50x150mm board, waterproofing, Technonicol tile insulation 150 mm thick, 50x30mm counter bar, 25x100mm batten board), MP 20 0.5 mm corrugated sheet, RAL in accordance with visualization (Appendix No. 1).
Interior decoration:
Walls:
crate - timber 50x100mm, timber 50x50mm, 20x40mm; tile insulation "Technonicol" for walls 100 mm thick; steam-waterproofing film; laminated GCL RAL 7035
Ceiling:
Armstrong is moisture resistant.
Floor:
- filing (profiled sheet C8 0,45 mm), edged board (150mm x 40mm), insulation 100 mm, OSB plate 9 mm, commercial linoleum RAL 7035 (security room), preparation for laying porcelain tiles 300x300 (entrance room) GVL 12 mm. In the security room, provide for the installation of a gray floor plinth.
- Provide an embedded plate at the place of attachment of the turnstile 300*300*5 (Appendix No. 2).
Windows:
- 3 pcs. in the security room 800*1200 mm of insulated aluminum profile (double glazing) mirror glazing, swing-out, profile color RAL – 9003 white, in accordance with the scheme (Appendix No. 2);
- 1 pc. in the walk-through room panoramic window 2700*1200 mm of insulated aluminum profile (double glazing) athermal glazing, without opening, profile color RAL – 9003 white;
- 1 pc. in an internal partition 1200*1200 mm with a sliding window 300*1200 mm for receiving and transferring documents, from a "cold" aluminum profile (one glass), the color of the profile RAL – 9003 is white.
Doors:
- 2 pcs. entrance to the room passage 950 * 2100 mm, of insulated aluminum profile (double glazing) athermal glazing with mortise lock, with door closers, profile color RAL – 9003 white. Provide a glass insert above the door in accordance with the visualization (Appendix No. 1).
- 1 pc. entrance to the security room 950*2100 mm, from a heat-insulated aluminum profile (double glazing) athermal glazing with mortise lock, with door closer, profile color RAL – 9003 white. Provide a glass insert above the door in accordance with the visualization (Appendix No. 1).
- 1 pc. in an internal partition 950*2100 mm, from a "cold" aluminum profile (one glass), with a mortise lock, with a door closer. Provide a glass insert above the door in accordance with the visualization (Appendix No. 1).
Electrics:
- Electrical wiring hidden in a corrugated pipe, 3-core cable, VVGNG (3 x 2.5) for sockets and (3 x 1.5) for lighting.
- Sockets in the security room (5 pcs.), in the entrance room – 4 pcs. (To coordinate the installation locations with the Customer).
- Provide for the cable outlet for the installation of the turnstile. To coordinate the location with the Customer.
- Two–key switch - 2 pcs.
- LED RECESSED LUMINAIRE DVO11-32-003 Frost 840 - 4 pcs. (2 pcs. in the entrance and 2 pcs. in the security room).
- Perform electrical wiring around the building through a closed-type box. Provide for the installation of circuit breakers:
Input – circuit breaker 16 A
Lighting - automatic switch of 6 A
Group of sockets - automatic switch of differential current – 10 A
Thermal curtains - automatic switch of differential current – 10 A
Air conditioning - 16 A circuit breaker
Turnstile - automatic switch 6 A
- To connect the building to the power grid, provide for the installation of a terminal box. Install the terminal box under the cladding of the building, make the panel above the installation site removable. The installation location should be agreed with the Customer.
In the security room, lay networks for installing an air conditioner. The installation location should be agreed with the Customer.
To provide embedded parts for fixing the visors glass triplex 8 +8mm above the entrance doors – 2 pcs. (1 pc. when entering the premises of the checkpoint, 1 pc. when leaving the premises of the checkpoint).
Venue of bidding:
This call for bids is held in electronic form on the e-marketplace of B2B-Center group (www.b2b-center.ru). Bids shall be submitted in the form of e-document.
Рассматриваются все предложения поступившие в рамках данного запроса НЕЗАВИСИМО от стоимости (при подаче предложений выше сметной стоимости, они будут объективно рассмотрены
Рассматриваются все предложения поступившие в рамках данного запроса НЕЗАВИСИМО от стоимости (при подаче предложений выше сметной стоимости, они будут объективно рассмотрены
:
Рассматриваются все предложения поступившие в рамках данного запроса НЕЗАВИСИМО от стоимости (при подаче предложений выше сметной стоимости, они будут объективно рассмотрены
