performance of works on repair of electric illumination of industrial premises of JSC "EPM-Naz" (Cpoip. The building of the re-firing body Inv. № 2673, section pekopropitki with horizontal autoclaves inv. № 2672. Cmojep. Span № 2 Inv. № 1626),...
performance of works on repair of electric illumination of industrial premises of JSC "EPM-Naz" (Cpoip. The building of the re-firing body Inv. № 2673, section pekopropitki with horizontal autoclaves inv. № 2672. Cmojep. Span № 2 Inv. № 1626), according to the projects of El 001.13285, 120918-09-ee. Smortite TK and related documentation (Complex service)Collapse
OKPD2 category:
Show all (2 more)
27.40.12.000 Лампы накаливания галогенные с вольфрамовой нитью, кроме ультрафиолетовых или инфракрасных ламп
27.40.14.000 Лампы накаливания прочие, не включенные в другие группировки
27.40.39.190 Арматура осветительная прочая, не включенная в другие группировки
33.20.50.000 Услуги по монтажу электрического оборудования
43.21.10.110 Работы по монтажу основных сетей электроосвещения и электроснабжения или электроарматуры, требующие специальной квалификации, в зданиях, сооружениях и на прочих строительных объектах
Not applicable. Proposal shall cover the entire lot.
Restriction on submission of a bid higher than previously submitted
Bidding initiator has set a restriction on submission of a bid with a price which is higher than the price of the previous bid submitted by the bidder. Once the bid is submitted, the stated price can not be increased.
:
Yes
Upload of bid-related documents required
Bids not supported with documentation will not be considered.
:
Yes
Auto-extension
If within the last 30 minutes of bid submission period a new bid is submitted, then bid submission deadline will automatically be extended by 30 minutes from the time the last bid is submitted.
:
30 minutes
Payment terms:
on the fact of performed works
Delivery terms:
1. Application of JSC "EPM-Naz", G. Novocherkassk
2. Purpose of work execution.
Bringing the level of illumination of industrial premises according to JV 52.13330.2011.
3. Data for determining the cost of work.
3.1. The volume of performed works is determined according to the attached project documentation.
3.2. The work is done from the contractor's material.
4. Requirements for the executor.
4.1. To clarify the conditions of work, acquaintance with the object is necessary to arrive representatives of the executor to the customer.
4.2 The executor in its commercial proposal indicates the procedure of payment of works and other conditions.
4.3 The executor must have the necessary production and human resources
To perform this work.
4.4 The executor in its commercial proposal indicates the procedure of payment of works and other conditions.
4.5. Certification of the head, engineers and executors on industrial safety and
Safety and health at GCO according to annex № 1.
4.6 Provision of measures against and BOP, safe methods of production of works at the facility.
4.7 Upon completion of the work, the executor shall transmit to the customer the
Documentation according to RD-11-02-2006 from 26.12.06. and other normative
Documents.
4.8 Provision of warranty obligations at least 12 months for its work, on LED lamps according to the manufacturer's passport.
Employees engaged to perform works on the repair of electric lighting of industrial premises of JSC "EPM-Naz" (Cpoip. The building of the re-firing body Inv. № 2673, section pekopropitki with horizontal autoclaves inv. № 2672. Cmojep. Span № 2 Inv. № 1626), according to the projects of El 001.13285, 120918-09-ee. Must have a vocational training corresponding to the nature of the work performed with the mark in the special certificate of training and passing exams in the Attestation commissions.
5. Working Conditions
5.1 The executor shall carry out the harmonization with all interrelated services.
5.2 Connection of the equipment to the electricity supply networks, according to the projects El 001.13285, 120918-09-ea. Appendix № 2.
5.3 Lifting mechanisms for dismantling and installation, equipment, tools, mechanisms for loading and unloading shall be provided by the executor.
5.4. A vehicle for the removal of debris, scrap metal or other waste is provided by the executor.
5.5 Electric welding, gas-rezochnoe equipment, consumables to them is provided by the executor.
6. Terms of performance of works.
6.1. Beginning of Works-October, 2018
6.2. Completion of works-December 31, 2018
7. Payment terms.
7.1. On the fact of performed works.
8. General Requirements
8.1. Specify the cost of work on the objects. Total cost of the lot. Cost of materials, cost of execution of works and type of LED lamp
8.2. A list of documents necessary for the design of outfits-the tolerances of the enterprise listed in annex № 1 is attached to the technical specification.
9. Safety of production of works
In the production of works the contracting organization must comply with the requirements of the following rules:
- Rules on occupational safety during operation of electrical installations;
- Rules of technical operation of electrical installations of consumers;
- Safety regulations for hazardous production facilities on which
Lifting structures are used;
- Rules of the device of electrical installations;
- Fire safety regulations;
- Rules on occupational safety at work at the height of the pot RM-012-200;
- Rules of environmental, sanitary and other norms operating in the territory of the Russian Federation and provide safe working conditions for life and health of people.
For the production of works the contracting organization should pass introductory instruction. All works performed in the territory of JSC "EPM-Naz" should be carried out according to the regulations "on the application of tolerance dresses in the production of high-risk works at JSC" EPM-Naz ".
This call for bids is held in electronic form on the e-marketplace of B2B-Center group (www.b2b-center.ru). Bids shall be submitted in the form of e-document.
