28.41.22 Станки сверлильные, расточные или фрезерные металлорежущие; гайконарезные и резьбонарезные металлорежущие станки, не включенные в другие группировки
33.20.3 Услуги по монтажу оборудования специального назначения
71.12.17 Услуги по инженерно-техническому проектированию производственных процессов и производств
Not applicable. Proposal shall cover the entire lot.
Restriction on submission of a bid higher than previously submitted
Bidding initiator has set a restriction on submission of a bid with a price which is higher than the price of the previous bid submitted by the bidder. Once the bid is submitted, the stated price can not be increased.
:
Yes
Upload of bid-related documents required
Bids not supported with documentation will not be considered.
:
Yes
Auto-extension
If within the last 30 minutes of bid submission period a new bid is submitted, then bid submission deadline will automatically be extended by 30 minutes from the time the last bid is submitted.
:
30 minutes
Payment terms:
The contractor in his commercial proposal indicates the deadlines, cost, payment options for work and other conditions. A prerequisite is the presence of estimate documentation for the performance of work in TEP or FER, attached to the TCH
Delivery terms:
1. Application of JSC "EPM-NEZ", Novocherkassk
2. Place of work:
Customer's territory, CO-2.
3. Name of works:
3.1. Carrying out work on the construction of the foundation of the machine, in accordance with drawing No. СТ13982 АС.
3.2. Installation of the machine at the design site in accordance with the drawing No. TX13982.
PS: Mount the machine in accordance with the manual for the machine - Universal screw-cutting lathe (model 165 RMC-2800 (DIP 500)).
3.3. Start-up and adjustment works of the DIP 500 machine.
4. Purpose of work:
Resharpening of defective workpieces.
5. Documentation: Drawings included:
5.1. Drawing No. СТ13982 АС;
5.2. Drawing No. TX13982;
PS: Drawings are enclosed with all specifications.
6. Requirement for the performer:
• The contractor must have the necessary production and human resources to carry out this work.
• Work performance under the possible impact of harmful production factors: dustiness, gas pollution, noise;
• Work in the cramped conditions of the existing workshop;
• Before issuing a work permit for work, the Contractor is obliged to provide the Customer with the following documents.
- copy of the certificate (SRO) for the right to perform this type of work;
- copies of documents confirming the availability of a labor protection service and / or a labor protection specialist in a contractor (order for appointment to a position in a contractor, a certificate of a labor protection specialist) or the existence of an agreement with an accredited organization in the field of labor protection services;
- a copy of the instruction on labor protection from the instruction log;
- POR or PPR or RTI;
- copy of the protocol of certification of workers for labor protection;
- copies of certificates of attestation of engineers and technicians for labor protection and general industrial safety requirements;
- medical clearance of personnel.
The Contractor shall notify the Customer about the fulfillment of all the specified conditions in writing with the attachment of all supporting documents. Failure to comply with the conditions of this clause by the Contractor gives the Customer the right not to allow the Contractor to perform the work, the delay in the execution of the work in this case is the fault of the Contractor.
7. Terms of work:
It is agreed with the Customer.
8.Terms of payment:
The contractor indicates in his commercial proposal.
9. Warranty obligations:
The Contractor provides the Customer with a guarantee for the work performed for at least 24 months from the date of putting the equipment into operation.
Georeferencing:
Rostov region, Novocherkassk, Aluminum platform
Comments: The participant who took part in the procedure (made an offer), before the deadline for accepting applications, must upload the following documents to the system:
- Commercial offer, indicating the deadlines, cost, payment options for work and other conditions.
A prerequisite is the availability of estimate documentation for the performance of work in the TEP or FER attached to the TCH
1. Charter (with all additions and changes, if any).
2. Certificate of state registration.
3. Tax registration certificate.
4. Extract from the Unified State Register of Legal Entities.
5. Balance sheet as of the last reporting date with the tax authority's mark of acceptance.
6. Documents confirming the authority of the representative to sign documents:
- Decision (Protocol).
- Power of attorney.
7. Work proposal (see the file "Work proposal")
8. Contact person: Martyschenko Oleg Mikhailovich - Chief Mechanic. Tel. 8 (8635) 29-48-24, fax 8 (8635) 29-42-55, e-mail: OMartischenko@energoprom.ru
9. Certificate of compliance with the requirements of ISO 9001: 2008 (if available)
This request is not a notification of a tender or auction and does not give any rights to participants, does not entail the emergence of any obligations other than those expressly indicated in the notification.
10. Before issuing a work permit for work, the Contractor is obliged to provide the Customer with the following documents:
- copy of the certificate (SRO) for the right to perform this type of work;
- copies of documents confirming the availability of a labor protection service and / or a labor protection specialist in a contractor (order for appointment to a position in a contractor, a certificate of a labor protection specialist) or the existence of an agreement with an accredited organization in the field of labor protection services;
- a copy of the instruction on labor protection from the instruction log;
- POR or PPR or RTI;
- copy of the protocol of certification of workers for labor protection;
- copies of certificates of attestation of engineers and technicians for labor protection and general industrial safety requirements. When performing work on gas, on vessels operating under pressure, using PMG, in electrical installations, during hot work - copies of certificates for each type of work;
- medical clearance of personnel;
- copies of certificates of gas-electric welders, slingers, crane drivers, hoists (towers). For gas-electric welders, copies of the certification protocols for PTM.
In case of revealing inconsistencies of the information in the submitted documents with the requirements of regulatory legal acts, the Customer has the right to initiate an audit by the Health and Safety Service in matters of Labor Protection and Industrial Safety in the Contractor's organization.
Venue of bidding:
This call for bids is held in electronic form on the e-marketplace of B2B-Center group (www.b2b-center.ru). Bids shall be submitted in the form of e-document.
Контактное лицо:
Мартыщенко Олег Михайлович - Главный механик
Тел. 8 (8635)29-48-24,
e-mail: OMartischenko@energoprom.ru
