Not applicable. Proposal shall cover the entire lot.
Restriction on submission of a bid higher than previously submitted
Bidding initiator has set a restriction on submission of a bid with a price which is higher than the price of the previous bid submitted by the bidder. Once the bid is submitted, the stated price can not be increased.
:
Yes
Upload of bid-related documents required
Bids not supported with documentation will not be considered.
:
Yes
Auto-extension
If within the last 30 minutes of bid submission period a new bid is submitted, then bid submission deadline will automatically be extended by 30 minutes from the time the last bid is submitted.
:
30 minutes
Payment terms:
The initial (maximum) price of the lot is rubles, including VAT and transportation costs for the delivery of MTR.
- Advance payment in the amount of 50% of the cost of products per delivery batch;
- The remaining 50% within 10 calendar days from the date of the actual delivery of the batch of products to the consignee's warehouse after providing the originals (S/F, TORG12, TTn, UPD)
- The batch is considered (the number of sets) in agreement with the customers.
Taking into account the transport costs for the delivery of the MTR.
Khanty-Mansi Autonomous Okrug - Yugra, Kondinsky district, Yagodny settlement
Comments: technical specification
Lot No. 137 "PCU metal structures"
1. Supervising department: Equipment Engineer, A.S. Kolesnikov, 8 913 685 59 88
2. Subject of the contract: Purchase of MTR
3. Object:
The main thread n/pr S-G-P 630-701 km Du-1200 mm. Pipe replacement on the 640-665 km section. Uraiskoe UMN. Reconstruction.
4. Place, conditions and terms (periods) of delivery of goods, performance of work, provision of services.
Shipping details:
Russia, KhMAO-Yugra, Kondinsky district, p. Yagodny, Embankment str., 52.
The delivery period of the MTR is until 20.04.2022.
5. Information about the initial (maximum) price of the contract (lot price):
The initial (maximum) price of the lot is rubles, including VAT and transportation costs for the delivery of MTR.
- Advance payment in the amount of 50% of the cost of products per delivery batch;
- The remaining 50% within 10 calendar days from the date of the actual delivery of the batch of products to the consignee's warehouse after providing the originals (S/F, TORG12, TTn, UPD)
- The batch is considered (the number of sets) in agreement with the customers.
6. The procedure for forming the contract price (lot price) (including or excluding transportation costs, insurance, payment of customs duties, taxes and other mandatory payments): Taking into account transportation costs for the delivery of MTR.
7. The requirements established by the customer for the quality, technical characteristics of the goods, work, services, their safety, functional characteristics (consumer properties) of the goods, the size, packaging, shipment of the goods, the results of work and other requirements related to determining the conformity of the supplied goods, work performed, services provided to the needs of the customer;
8. Requirements for procurement participants:
Absence of unscrupulous suppliers in the register. Absence of arrears in taxes and fees for the reporting period. Absence of liquidation, bankruptcy, suspension of activity.
9. The list of necessary licenses, certificates, permits for the right to work:
Quality certificates, certificates of conformity for the supplied MTR.
10. Special conditions for the delivery of goods, performance of works, provision of services
10.1 The manufacturer must inform about the readiness of the products no later than 10 days before sending them to the facility. To organize access to the manufacturing base of the manufacturer of the representative of LLC "Geoinform" to check the quality of products during its manufacture and before sending to the facility. When ready for shipment, send copies of passports, certificates for products and accounting documents to e-mail kas02051981@mail.ru
10.2 Development of a set of drawings (KMD).
10.3 Anti-corrosion protection and painting :
Before applying the automatic transmission, the metal surfaces must be:
- purified Sa 2.5 GOST R ISO 8501-1-2014
- dust-free, surface dedusting class 2 (ISO 8502-3)
- degreased, degreasing degree 1 (GOST 9.402-2004)
The production of works on corrosion protection of metal structures should be carried out in accordance with the requirements of RD-23.040.00-LTN-088-14.
Paint all metal structures with an anti-corrosion coating AKP C4 (II) UHL1 in accordance with OTT-25.220.01-KTN-097-16.
-Table No. 1 – for all positions, use a primer layer of Isolep-mastic with a coating thickness of one layer of 180 microns, WITH the EXCEPTION of positions (p.1.14, p. 1.16).
-Table No. 1 item 1.1 use only the epoxy primer of Isolep-mastic, with a coating thickness of one layer of 180 microns.
-Table No. 1 pos.: 1.2 - 1.8, 1.13, 1.15, 1.17, use an Isolep-mastic primer layer with a coating thickness of 180 microns in one layer, then a POLYURETHANE UR (UV) coating layer with a coating thickness of 60 microns RAL 7000 in one layer, the total thickness should be at least 240 microns.
-Fencing OGP1, OGP2, OL1 (p.1.11, p.1.12, p.1.13) use a primer layer of Isolep-mastic with a coating thickness of one layer of 180 microns, then a coating layer of POLYURETHANE UR (UV) coating thickness of one layer of 60 microns RAL 1023, the total thickness should not be less than 240 microns.
WITH THE EXCEPTION OF the FLANGING STRIP OGP1, OGP2, OL1 (p.1.10, p.1.11, p.1.12) - for which to use a primer layer of Isolep-mastic with a coating thickness of one layer of 180 microns, then a coating layer of POLYURETHANE UR (UV) coating thickness of one layer of 60 microns RAL 7000, the total thickness should be at least 240 microns.
- The quality of the paintwork should correspond to class IV according to GOST 9.032-74.
- The thickness of the zinc coating of the lattice flooring of service areas, stairs should be at least 50mkm. Provide for a sliding tooth C4 at the decking and steps.
- It is necessary to take into account all the fasteners of the service platforms, lattice flooring, profiled sheet, etc. (hardware products, self-tapping screws with a metal press washer).
10.4 Does not require manufacturing
11. Materials, documentation submitted by the Customer:
Design drawings.
12. List of submitted documents based on the results of the work
The supplier submits, no later than the 5th of the month following the reporting one:
- an invoice for payment of the delivered MTR,
- invoice for delivered MTR,
- consignment note TORG-12 for the delivered MTR.
13.Applications: None
Head of PTO __________________ Malyutin I.K. _________________________________
signature date
This call for bids is held in electronic form on the e-marketplace of B2B-Center group (www.b2b-center.ru). Bids shall be submitted in the form of e-document.
Отдел подготовки и проведения торгов:
Для справок по предмету закупки (открытого запроса предложений) обращаться к Овчинникову Святославу Эдуардовичу, тел. 8-983-110-12-94 E-mail: Pdo_pdo@list.ru
Контактное лицо:
Инженер по комплектации, Колесников А.С., 8 913 685 59 88
