Call for Bidding of machines for a repair site, a plant for the production of refrigeration and freezing equipment Call for Bidding of machines for a repair site, a plant for the production of refrigeration and freezing equipmentCollapse
OKPD2 category:
Show all (5 more)
28 Машины и оборудование, не включенные в другие группировки
28.4 Оборудование металлообрабатывающее и станки
28.41 Оборудование металлообрабатывающее
28.41.2 Станки токарные, расточные и фрезерные металлорежущие
28.41.22 Станки сверлильные, расточные или фрезерные металлорежущие; гайконарезные и резьбонарезные металлорежущие станки, не включенные в другие группировки
28.41.23 Станки для снятия заусенцев, заточные, шлифовальные или станки для прочей доводки металлов
Организатор указал предполагаемую дату подведения итогов. Если в процедуре не будут подведены итоги при наступлении этой даты, то участники могут запросить их самостоятельно
Bidders can submit a bid for separate items within the call for bids
:
Applicable
Alternative bids
Alternative bid is a bid, of which the terms and conditions differ from those established in the bid-related documents.
:
Yes
Upload of bid-related documents required
Bids not supported with documentation will not be considered.
:
Yes
Procurement documentation:
Not uploaded
Auto-extension
If within the last 30 minutes of bid submission period a new bid is submitted, then bid submission deadline will automatically be extended by 30 minutes from the time the last bid is submitted.
:
30 minutes
Payment terms:
Postponement of payment 30 calendar days from the date of receipt of the Goods at the warehouse and signing of shipping documents
Delivery terms:
Delivery is required at the address Naberezhnye Chelny, Corporation Khayer str., zd 130 with unloading
Comments: 1) STALEX MUF150 Servo Wide-universal Milling Machine
Manufacturer STALEX
Supply voltage 400 V
Power consumption 3 kW
Diameter of the end mill (min)0 mm
End mill diameter (min)0 mm
Spindle ISO40
Distance from spindle to table (min)210 mm
Table size 1370mm
Dimensions 1840 mm
Weight 15-40 kg
End mill diameter (max)35
End mill diameter (max)125
Distance from spindle to table (max)610
Table tilt angle+/-45
Angle of inclination of the milling head+/-360
The course of the table on the X and Y axis is 1000
The course of the table along the X,Y,Z0 axis
Vertical spindle speed (max)1660
Vertical spindle speed (min)45
Horizontal spindle speed (max)1500
Horizontal spindle speed (min)35
2) Turning and screw-cutting machine KMT KC51B
The installed diameter above the bed, mm Ø 510
The installed diameter above the caliper, mm Ø 305
The installed diameter above the GAP recess in the bed, mm Ø 735
GAP recess length, 170 mm
Distance between centers, mm 150
Bed width, mm 350
The headstock:
Spindle end face D1-8 Camlock (DIN 55029, ISO 702/II
Diameter of the hole in the spindle, mm Ø 80
Spindle bore cone M.T. No.7
Number and range of spindle speeds, RPM 12 speeds
25 - 1600
Feed and threads:
Maximum movement of the transverse support, mm316
Maximum movement of tool sleds, mm130
Diameter and pitch of the lead screw, mm Ø40 x 6
The size of the cutter holder, mm25 x 25
Angle of rotation of the tool holder, °±90
The range of longitudinal feeds, mm/about 35 feeds, 0.117 - 4.938
The range of transverse feeds, mm/about 35 feeds, 0.060 - 1.719
Number and pitch of inch thread, T.P.I60 steps, 2 - 112
Number and pitch of metric thread, mm47 steps, 0.2 - 14
Number and pitch thread pitch, D.P. 50 steps, 4 - 112
Number and step of modular thread, M.P. 39 steps, 0,1 - 7
Engines:
Power of the main drive, kVt7.5
Coolant pump power, kVt0.09
Power Consumption:
Voltage, V380
Frequency, Hz 50
Overall dimensions:
Length, mm2840
Width, mm1150
Height, mm1430
Weight, kg 2335
Overall dimensions in the package:
Length, mm2900
Width, mm1150
Height, mm1740
3) Flat grinding machine M7130
Table
Width of the working surface of the table mm 320
The length of the working surface of the table mm 1000
Longitudinal movement of the table mm 200-1050
The number of T-slots on the table is 3
Width of the T-slot mm 18
The speed of longitudinal movement of the table m/min 3-27
Feeding system
Max distance from the spindle axis to the working surface of the table mm 575
Min distance from the spindle axis to the working surface of the table mm 135
Manual cross feed (degree) mm 0.03
Manual cross feed (turn) mm 3
Cross feed speed m/min 0.5-3
Transverse feed movement mm 350
Manual vertical feed of the grinding head (degree) mm 0.01
Manual vertical feed of the grinding head (revolution) mm 1
Accelerated feed of the grinding head mm/min 250
Grinding wheel Dimensions of the circle (External DXTXINTER d) mm 350x40x127
Spindle speed RPM 1440
Hydraulic system Working pressure MPa 1.1-1.3
Hydraulic pump motor power kW 3
Lubrication pressure 0.2-0.3 MPa
Power
Power at maximum load kW 9.2
Grinding spindle motor kW 5.5
Hydraulic pump motor kW 3
Motor for lifting the grinding head kW 0.55
Cooling system pump motor kW 0.12
Processing parameter range Length mm 1000
Width mm 300
Height (including magnetic table) 400 mm
Maximum lifting force kg 468
Parallelism of the treated surface mm 0.008/300
Surface roughness of microns Ra:0.63
Dimensions (LxWxH) mm 2295x1675x2035
Weight kg 3500
4) Radial drilling machine 2RD40
Maximum drilling diameter (steel 45),mm40
Maximum drilling diameter (cast iron SH20),mm52
Thread diameter (steel 45), MM32
Thread diameter (cast iron SH20), MM40
Cone Spindelyamt4
Maximum spindle movement, mm260
Distance from the rack to the spindle axis, mm300..1300
The stroke length of the headstock in horizontal position (in manual mode), mm
1000
Distance from the end of the spindle to the lower table of the machine, mm300..1200
Spindle speed control stepless
Spindle speed range, rpm 54-340;340-2150
Number of spindle feed stages 4
Spindle feed range, mm/about 0.10 — 0.63
The power of the electric motor of the main movement, kW 2.2
The power of the electric motor moving the console, kW 1.1
Engine power of the oil clamping pump for spindle headstock, column and console, kW 0,37
Overall dimensions of the machine (LxWxH), mm 2070x850x2430
Machine weight, kg 2300
Venue of bidding:
This call for bids is held in electronic form on the e-marketplace of B2B-Center group (www.b2b-center.ru). Bids shall be submitted in the form of e-document.
