Marketplace

Installation and dismantling of APS and SSE equipment. Scope of work: 1. Delivery and Installation of DIP on Armstrong - 43 pcs 2. Supply and Installation of USK - 2 pcs 3. Dismantling the DIP - 18 pcs 4. Delivery and Installation of IP - 1 pc 5. Delivery and Installation of the "EXIT" scoreboard - 2 pcs Installation and dismantling of APS and SSE equipment.

Replacement of crane tracks of the SGP Dismantling, installation of rails KR70

Manufacturing of the shaft-asterisk according to the drawing on the equipment of the ROBOR production line. Not allowed: 1. Burrs; 2. Sharp edges blunt radii or chamfer 0.3...0.5 mm; 3. Roughness not more than Ra 1.6 Manufacturing of the shaft-asterisk according to the drawing on the equipment of the ROBOR production line.

Manufacture of shut-off valves for spray nozzles - 16 pcs. To make a shut-off valve from steel 12x18N9T GOST 5632-72, the material steel 12x18N10T8 GOST 5632-72 is allowed. All materials, equipment for manufacturing are provided by the Supplier. Manufacture of shut-off valves for spray nozzles.

Production of products according to drawings - pallets for shipment

Provision of transportation services for the transportation of employees to the place of work and back along the route according to the Requirements Specification.

Service and repair of air conditioners on the territory of the enterprise.

Repair of coating (gumming) of rollers Restoration of shafts with polyurethane coating

Repair of coating (gumming) of rollers. Restoration of shafts with polyurethane coating.

Production of the axle of the wheelset on the freight transfer cart according to the Customer's drawing - 1 pc. Material: 40GM steel. Manufacturing of the axle of the wheelset on the cargo transfer cart.

Selection of a contractor to carry out repair and construction work. Repair of the steps of the entrance group. Laying paving slabs.

1. The leading drum (with cold gumming): • Drawing: TM 2123.00.000 • Quantity: 2 pcs. • Material for manufacture: St3, 09G2S, St20

1. Drive drum: • Drawing: TM 1944.00.000 • Quantity: 2 pcs. • Material for manufacturing: St3, 09G2S, St20

1. Drum (right): • Drawing: TM 2019.00.000 • Quantity: 1 pc. • Material for manufacture: 09G2S, St20 • The cylinder is made of pipe 351*22 steel 09G2S 2. Drum (left): • Drawing: TM 2020.00.000 • Quantity: 1 pc. • Material for manufacture: 09G2S, St20 • The cylinder is made of pipe 351*22 steel 09G2S

1. The shaft of the presser: • Drawing: 0, S220017 • Quantity: 4 pcs. • Material for manufacturing Steel 38NiCrMo4 or 40KHN2MA 2. The shaft of the presser: • Drawing: 0, S220018 • Quantity: 4 pcs. • Material for manufacturing Steel 38NiCrMo4 or 40KHN2MA 3. The shaft of the presser: • Drawing: 0, S220019 • Quantity: 4 pcs. • Material for manufacturing Steel 38NiCrMo4 or 40KHN2MA 4. The shaft of the presser: • Drawing: 0, S220020 • Quantity: 4 pcs. • Material for manufacturing Steel 38NiCrMo4 or 40KHN2MA

Impeller DO1111.000.01.010SB - 2 pcs Drying Fan

Provision of energy audit services for an industrial enterprise. The following are subject to energy audit: 3.1. Facilities of the enterprise: production building with technological equipment, production premises of tenants, 4-storey ABC building; 3.2. Equipment of the main technological process: - Redman paint line (gas is used for the technology of the paint line); - "Hana" mill; - "Comec" mill; - Samesor mill; - "SS10" mill; - mill "C10"; - Andalusia camp; - edge bending press "Horns"; - the line of longitudinal-transverse metal cutting "LSK"; - compressor room (5 pieces of equipment); - overhead cranes (4 pieces of equipment); - built-in boiler room for heating water for heating and hot water (12 months) boiler "Micro- M 200" - 3 pcs. with a capacity of 200 kW; - TG "Kroll 360 S-250" power 300 kW. with burner Giersch MG10/1 – 4 pcs.; - TG "Carlieuklima B350" power 400 kW. with burner Cibunigas NG550 – 3 pcs.; - TG "Carlieuklima B160" power 186 kW. with burner Cibunigas NG200 – 2 pcs.; - TG "Carlieuklima V110" power 127 kW. with burner Cibunigas NG140 – 1 pc. Provision of energy audit services for an industrial enterprise

1. Replaceable superstructure (MVP-1) • Material for manufacturing Steel 3, Sheet 10; • Quantity – 40 pcs. (a=40mm, b=280mm) • Drawing - TM 1676.00.000 2. Removable extension (MVP-2) • Material for manufacturing Steel 3, Sheet 10; • Quantity – 40 pcs. (a=35mm, B=363mm) • Drawing - TM 1676.00.000

1. Sealing brush: • Material for manufacturing Steel 3; • Quantity – 60 pcs. • Drawing – TM 1948.00.000

Manufacturing of the side seal of the Design and Survey Work line (roof 80 mm and 120 mm) from heat-resistant antistatic polyethylene PE-500 (with an operating temperature of 80'S) of lining elements in the amount of - 100 pcs. size 80mm; - 100 pcs size 120mm It is allowed to replace the material with PE-1000 (antistatic). The service life after manufacture is at least 2 years. Manufacturing of the lateral seal of the Design and Survey Work line (roof 80 mm and 120 mm) from heat-resistant antistatic polyethylene PE-500.