Repair of the front with replacement of the end column and the right wall. CGE section 8 furnace No. 6 inv.No.5673 See the terms of reference and related documentation.
When downloading documentation, the availability of estimates is a prerequisite for considering the proposal. (Complex service)Collapse
Not applicable. Proposal shall cover the entire lot.
Restriction on submission of a bid higher than previously submitted
Bidding initiator has set a restriction on submission of a bid with a price which is higher than the price of the previous bid submitted by the bidder. Once the bid is submitted, the stated price can not be increased.
:
Yes
Upload of bid-related documents required
Bids not supported with documentation will not be considered.
:
Yes
Auto-extension
If within the last 30 minutes of bid submission period a new bid is submitted, then bid submission deadline will automatically be extended by 30 minutes from the time the last bid is submitted.
:
30 minutes
Payment terms:
Monthly, within 30 (thirty) banking days after the delivery of the results of the work, provided that the work is done properly and within the agreed period. The works are considered completed after the Parties sign the Act of Acceptance of the completed works (form COP-2) and a Certificate of the cost of the completed works and costs (form COP-3).
When downloading documentation, the availability of estimates is a prerequisite for considering the proposal.
Delivery terms:
1. Application of JSC "EPM-NEZ"
2. Place of work: The territory of the customer (JSC "EPM-NEZ").
3. Object (technical device)
Industrial batch furnace for gasification of fired workpieces. A panel-frame type furnace, conventionally consisting of 3 parts: a system of underground supply and exhaust channels, a monolithic w / w foundation with channels, grooves and recesses and an aboveground part of the 1st half on alternating current.
4. The purpose of the work:
Restoration of the front end with replacement of the end column and the right wall of the furnace – according to the technical documentation.
5. List and scope of work performed: according to the drawing PCH 08747 SB
6. Appendices: Technical documentation (drawings) - PM 08747 SAT
7. Requirement to the contractor:
7.1 Repair of the front end with replacement of the end column and the right
walls. CGE Section 8 Furnace No. 6 inv.No.5673 are made from Customer materials.
7.2 Working in the conditions of an operating enterprise. The operating mode of the enterprise is round the clock
7.3 Harmful factors may be affected: dustiness, gas contamination
7.4. Development of PPR and technological maps for all necessary work.
7.5. The Contractor must have the necessary production and human qualified
resources to perform this work. Have the certification of the head, ITR and workers on
industrial safety, copies of documents confirming the presence in the contract
organizations of the labor protection service and/or a labor protection specialist (
appointment order
for a position in a contracting organization, a certificate of a labor protection specialist) or
availability of an agreement with an accredited organization in the field of labor protection services
also the presence of a medical permit
7.6. Availability of SRO for these types of work.
7.7. Availability of machines and mechanisms to perform the entire complex of work.
7.8. The Contractor's personnel must have and use personal protective equipment.
7.9. In case of comments to the staff on the quality of work performed, violation of equipment
security, as well as administrative violations, upon request
The Contractor is obliged to replace the Customer's specialists immediately.
7.10. The work performed not of high quality must be redone at the expense of the Contractor and handed over
To the customer.
7.11. The placement of workers employed to perform this work is carried out by the Contractor.
The customer, if possible, can arrange the placement of workers on a contractual basis
based on.
7.12. Development and approval of linear schedules for furnace repairs.
8. Payment terms: monthly, within 30 (thirty) banking days after the delivery
of the results of the work, provided that the work is done properly and within the agreed time. The works are considered completed after the Parties sign the Act of acceptance of the completed works (form COP-2) and a certificate of the cost of the completed works and costs (form COP-3).
9. Terms of work: The approximate date of the work May 2022. The beginning and end of the work are agreed with the Customer.
10. Warranty obligations for the work performed: 24 months from the date of completion of the work, for each of the repaired objects.
11. The transfer for repair and acceptance of equipment from repair is carried out in accordance with the REGULATIONS approved at EPM-NEZ JSC.
12. Repair of furnaces is carried out in the operating workshop. The repair schedule is coordinated with the workshop (TSPOIP) and the plant services (UM, EU).
13. The list of documents provided to OTB EGOICHI for registration of work permits for the production of works by contractors:
Prior to registration of the work permit, the Contractor is obliged to provide
To the customer the following documents:
1. a copy of the certificate (SRO) for the right to perform this type of work;
2. copies of documents confirming the presence of a service for
contractor, certificate of a labor protection specialist) or the presence of
contracts with an accredited organization in the field of labor protection services;
3. a copy of the instruction on labor protection from the instruction log;
4. POR or PPR or RTI;
5. a copy of the protocol of certification of workers on labor protection;
6. copies of certificates of certification of ITR for labor protection and general requirements
industrial safety. When performing work on gas, on vessels operating
under pressure, using GPM, in electrical installations, fire works
7. copies of certificates for each type of work;
8. medical admission of personnel;
9. copies of certificates of gas and electric welders, slingers, crane operators,
lifts (towers). For gas and electric welders, copies of certification protocols for
PTM.
The Contractor notifies the Customer about the fulfillment of all the specified conditions in writing
the form with the attachment of all supporting documents. Non-fulfillment of conditions
this paragraph by the Contractor gives the right to the Customer not to allow the Contractor to
the execution of works, the delay in the execution of works in this case is the fault
Contractor.
14. Note:
- Delivery of the material from the warehouses of JSC "EPM-NEZ" to the place of work, garbage removal (not slagged refractory bricks, graphite, scrap metal, etc.) to the storage sites located on the territory of JSC "EPM-NEZ" is carried out by the Contractor's transport.
- Garbage removal of all categories to landfills for receiving industrial waste located outside the territory of JSC "EPM-NEZ" (garbage removal at a distance of 7km to 30km.) is carried out by transport provided by the Customer, upon prior request of the Contractor.
- Waste disposal costs of all categories, at landfills receiving industrial
waste located outside the territory of JSC "EPM-NEZ" is carried out at the expense of the Customer.
- Overhead cranes for work on furnaces are provided by the Customer, the driver
the Contractor provides a bridge crane to perform the work.
- When uploading a commercial offer to the B2B electronic trading platform,
it is also necessary to load the estimated documentation, the availability of estimates
a prerequisite for the consideration of the proposal.
Georeferencing:
Russia, Rostov region,
Venue of bidding:
This call for bids is held in electronic form on the e-marketplace of B2B-Center group (www.b2b-center.ru). Bids shall be submitted in the form of e-document.
